AR Sponsor
Posted: 2/13/2005 5:13:49 AM EDT
|
Has anybody out there got any pictures of a US OPTICS SN3 -6X30X58 with a 35 mm tube fitted to a flat top AR15 with normal plastic hand guards. These are big scopes!! What height of rings did you use . I do not want to buy a set of rings then find out the front of the scope is touching the hand guards !! I only want to use rings and not any other rail + ring configuration . |
I don't have any standard plastic handguards, and mine is an SN3 3-10X but hopefully it'll give you some idea    The factory US Optics mount is too low for a good cheekweld for me, I used an ARMS #36 to raise it a little. This configuration has since changed, I now use the SN3 with ARMS #22 high rings on my Remy 700. eta: it's #36, not #37 
|
| Thanks . To be specific, I am talking about the Pic rail that looks like it mounts on top of the Pic rail of the upper receiver, so the rail mount is higher and longer than the one on the receiver. Are we on the same page? The Posi Mount is attached to the rail I am talking about. |
AR Sponsor