AR Sponsor
Posted: 6/9/2004 4:00:20 PM EDT
|
I remember seeing a post that talked about a BM Dissipator where the rear sight had to be all the way over to the left in order to sight in the rifle. I tried searching for it but I can't seem to find it. Does anyone have the link or know what the outcome was to correct the issue? I have the same problem on my BM dissy. Thanks in advance for the help! M590man |
| I had a Bushmaster Dissipator that was way off on windage. I fixed it myself. I removed the front site post, drilled set screw holes into the bottom of the front post assy, adjusted it to be straight, tightened it down and lock-tited it, and have had no problems since. Moving the front site post is not a problem since the dissapator gas port is under the second cut-off site base. Bushmaster had a bad run of way off sight posts a few years ago. I hate the hassle of sending it all back to the manufacturer after waiting for so long to get it in the first place. It was an easy fix. Just my experience. |
AR Sponsor