AR Sponsor
Posted: 9/6/2003 2:06:56 AM EDT
|
I have just bought an Ar with a detachable carry handle sight. Trying to follow instructions for setting this sight appears a little more difficult that it should be. It is a dpms handle/sight, but the graduation markings on the elevation wheel run 0 5 10 15 20. The gun was a custom build (UK resident) and I do not have a hand book for it. Does anybody else have this handle, or is able to advise? Thanks bbutter |
|
I've never heard of a sight graduated like that. Is there any way you can get a "standard" elevation wheel for the rear sight? If nothing else, you can always simply zero at 50yds, which will kep the bullet within 2.5 inches of line-of-sight from 8M out to around 220M. [url]http://communities.msn.com/TheMarylandAR15ShootersSite[/url] Click on the link for zeroing methods on the left, and check out the improved battlesight zero. That is, once MSN fixes whatever their problem is (links within the sight are not working, just now). |
| After thinking about it, the only thing that makes sense it that the graduations may be for "Minute of Angle", which actually wouldn't be all that bad, as long as you know the trajectory of your ammo at a given range. I'll go out on a limb, and say it sounds like a sight intended for match shooting. |
|
Thanks again Zardoz, Chuck, and all who have posted replies. The gun has a match barrel, and some mods to the trigger I believe, so if there is such a thing as a wheel intended for match shooting, that may be the answer. Perhaps the first port of call will be the gunsmith. see what he can tell me :-) Thanks again |
AR Sponsor