AR Sponsor
Posted: 4/15/2003 3:10:47 PM EDT
|
I Just bought a ARMS #46SL Slim-Line SIR, an ARMS #40 BUIS and a EOTech 552. I'm getting nervous now since I don't really know if this setup will work. I didn't have a lot of time to reserch it since I'm on my way to Iraq! Please help. Thanks freak |
|
as far as co-witness, this set up will not enable that, but as far as how everything will mount, this setup is good to go. you should have gotten the #50 slim line bi-level for the EOTech to co-witness. can you have it exchanged before you deploy?? another way is to get an Aimpoint with ARMS #22/M68 mount. |
| Crap dude, see if you can trade your #46 SIR for a #50 SIR. The #50 has the bi-level rail that will allow you to mount the EoTech and still co-witness. You *CAN* mount the EoTech on the #46, but you will not be able to co-witness your irons. It will sit too high. |
|
Quoted: Crap dude, see if you can trade your #46 SIR for a #50 SIR. The #50 has the bi-level rail that will allow you to mount the EoTech and still co-witness. You *CAN* mount the EoTech on the #46, but you will not be able to co-witness your irons. It will sit too high. Ditto. |
|
Quoted: I would rather the irons sit in the lower third of the view window anyways, for a less obstructed view of the 552, would this be the case? And yes I still have time to swap it out. I need your advice peeps! You won't even see the iron. got to go with a #50 SIR. can you exchange it?? |
|
The C and the M should both work fine. If you're going to mount this on a service rifle you should probably get the C. You have to remove the Delta ring to mount the M and the armorer might not like you taking 'his' rifles apart. I'd go with the slim #50 because it's easier to hold on to while wearing thick gloves. |
AR Sponsor