Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
AR Sponsor
2/4/2005 12:16:37 AM EDT
Sorry for my ignorance, but how do the loaded stripper clips, cardboard, and spoon go into the bandoleer.  What do you do with the Safety Pin?  Thanks.
2/4/2005 5:00:39 AM EDT
[#1]

Quoted:
Sorry for my ignorance, but how do the loaded stripper clips, cardboard, and spoon go into the bandoleer.  What do you do with the Safety Pin?  Thanks.



You must not have all this in front of you yet or you would have ask what the white string is for on the bandoleer LOL. The cardboard insert holds three loaded stripper clips inserted  in alternate directions. Example, Up-Down-Up. Each pocket holds one cardboard insert. The safety pin can be used to adjust the length of the bandoleer strap and/or pin the loading spoon to the bandoleer. Personally I allways used the pins to attach a P38 to my TSF or flip leeches off. The spoon can also be carried in the bandoleer pocket slid into the edge of a cardboard in the pocket. Use the upper bandoleer pocket if you decide to store the spoon in this way.  The ammo in the upper pocket should allways be used first. Let me know if you do run into one of those white strings and cant figure out what it is used for. Oh yea, there is a section on this board about stripper clips,etc. Hope this helps.
2/4/2005 6:51:20 AM EDT
[#2]
Many thanks.  Read the FAQ and couldn't find the answer to the safety pin question.  In the old days, we removed the white string and used the pockets for full magazines.      
AR Sponsor