AR Sponsor
Posted: 9/20/2003 2:37:51 PM EDT
| I have only one plastic mag in my whole mag whore inventory and it is an orlite. It has a rib that runs around the mag that should fit up against the mag well. The one I have won't catch the mag latch. Can I grind that rib off so it will catch? Anybody wanna trade for a usgi............lol |
| Don't grind off the whole over insertion rib or the mag could be, well, over inserted. First try putting a nice 45 degree chamfer on the ends of the ribs with a flat file. If that doesn't work, file the whole top surface about 15 thousandths or so till it latches. |
AR Sponsor