AR Sponsor
Posted: 5/31/2014 11:28:12 AM EDT
|
Received my Colt 9mm Lula magazine loader today. How sweet it is!
Works great both loading and unloading if you so desire. I had to wait for couple of months but it was worth the wait. I highly recommend them. Those Israel military planners know their stuff'. |
|
I returned from vacation today and found the same thing in my mailbox!!
http://i253.photobucket.com/albums/hh78/kdventus/5f6354ed70269682b7ed81738bc72f6f.jpg |
| I have used the Cammenga(sp?) Easyloader with great success while loading 20 and 32 round metalform mags. Also, I think that they have worked well with the old C products mags. However, it is tedious to load the easy loader itself. Is there anyone out there that have used both for comparison? |
|
Quoted:
I have used the Cammenga(sp?) Easyloader with great success while loading 20 and 32 round metalform mags. Also, I think that they have worked well with the old C products mags. However, it is tedious to load the easy loader itself. Is there anyone out there that have used both for comparison? I've got and have used both Cammenga and C-mag. LULA wins hands down. I own a LULA for every mag system I have for which there is a LULA made. I even use my MP5 LULA to load my MP5 cmags. |
|
Quoted:
Maybe slightly off topic. But would sten loaders work with metalform mags? There are three or four types of sten loaders. Some might work with a metalform mag, if they just squat over the top of the feed tower to provide a pusher lever or button, and if they'd physically and stably fit on the metalform mag (sten mags are much thinner and pointier at the top than colt pattern magazines). |
|
Be careful if you use the LULA with C-Products mags. I have a couple of them and they are even worse than Colt/MF mags in terms of spring stiffness. I can't load them past 20-25 rds even with the Lula. They will actually pull the little metal tab (the part that locks in the mag's catch) out of the plastic body of the loader. I would love to see a metal-body version of that loader to do away with that one weak spot.
They do work fantastically well with Colt/Metalform mags though. |
AR Sponsor