Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 9/5/2010 6:08:19 PM EDT
TS AR-22 MC on a RRA lower with AGP Arms folding stock.
Had the standard trigger in the lower and ran fine, switched
out to a Wilson single stage trigger which is nice but the gun
is not resetting the sear. Running CCI standard velocity and
the gun is cycling fine but the trigger is not resetting. Tried
some CCI mini mag but the problem was still there. Would
occassional reset but not most of the time.

Any ideas on a fix?!

Thanks,
Shea
Link Posted: 9/7/2010 3:26:13 PM EDT
Any ideas from the experts?!?!

Thanks,
Shea
Link Posted: 9/7/2010 4:02:56 PM EDT
[Last Edit: 9/7/2010 4:05:12 PM EDT by SpecOps-13]
I had a similar malfunction with a different make lower and the Wilson Combat Trigger Pack.
It was with CCI Standard Velocity Ammo too. I don't use that combination any more. That or
change out the trigger pack. The Tac Sol Upper seems to put the trigger at the tipping point
to reset or not.

Good Luck,
Spec
Link Posted: 9/7/2010 5:22:29 PM EDT
Had the same thing happen with a Timney in a TacSol upper / Aero lower. Went back to the stock trigger because it runs 100% on Winnie bulk 333's that way.
Top Top