[ARCHIVED THREAD] - Hahn Precision top load block

Posted: 12/18/2008 1:05:03 PM EDT

I'm thinking of getting one of these and would like to see some pictures up close. I'm thinking of going with this, C Products mags and a RRA upper. ANy detailed pics would be great.

Posted: 12/18/2008 2:39:37 PM EDT

[#1]

Nothing like going right to the source HAHA - CLICK ME!!!

Posted: 12/19/2008 6:24:03 AM EDT

[#2]

I looked at that. I was more interested in pictures of the block inside a lower receiver.

Posted: 12/19/2008 1:32:58 PM EDT

[#3]

Quoted:
I looked at that. I was more interested in pictures of the block inside a lower receiver.

This is the dedicated block that inserts through the top, Is this is the one that you're looking for?

Posted: 12/19/2008 2:44:58 PM EDT

[#4]

The hahn dsedicated magblock is top notch, however they don't work very well with Cproduct mags. Best bet is to get some older Colt mags or metalform mags, then you will be GTG.

Posted: 12/19/2008 2:58:42 PM EDT

[#5]

Follow some of the advice given in the following post especially about the mag catch postition between the orginal Colt and the new CProducts mags.

http://www.ar15.com/forums/topic.html?b=3&f=15&t=408156&page=1

Posted: 12/19/2008 6:32:25 PM EDT

[#6]

Quoted:
The hahn dsedicated magblock is top notch, however they don't work very well with Cproduct mags. Best bet is to get some older Colt mags or metalform mags, then you will be GTG.

They work 100% in my gun with a Hahn dedicated block. I did have to shave a bit from the front of the followers to allow them to clear the feed ramp on the block so the BHO would work.Took about 3 mins per mag.

[ARCHIVED THREAD] - Hahn Precision top load block

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Hahn Precision top load block

[ARCHIVED THREAD] - Hahn Precision top load block