AR Sponsor
Posted: 3/15/2017 11:20:01 PM EDT
|
Hey everyone,
This isn’t so much a question as it is a thank you to the community here on AR15.com. I joined a little over two years ago when I was first looking at putting together an AR-15 for myself. We already had two other factory ARs in the family but none that had been assembled from the get go and none that were 'mine'. So this AR is the first one that officially belonged to me and I can say that with pride from how it turned out. Y’all certainly had a hand in that so I wanted to show y'all how it looks! I started getting all of my parts together in May 2016 and by the time summer had ended, I had a finished my AR-15. I feel like my rifle turned out okay, so I figured I would post about it (finally). So thanks for y’all’s help! Parts list as follows, Wilson Combat matched receiver set YHM EZ Pull pins BAD-ASS Ambi Selector Wilson Combat 16-inch, lightweight profile, 1/8 twist barrel Fail Zero M16/M4 BCG BCM Gunfighter Mod 4 charging handle SilencerCo ASR Muzzle Brake LaRue MBT-2S, two-stage trigger B5 Enhanced Sopmod Stock Magpul MOE+ Barnes Precision Ultralite 12-inch Magpul MBUS sights Aimpoint PRO RDS LaRue LT606 offset flashlight mount NovaTac 120T light Magpul sling All in all, the rifle ran me right around $1,675 before I purchased my Aimpoint PRO which brought to a hair below $2100. It sure does shoot sweet! About 500 rounds so far and not a single problem! Oh and pictures! 
|
|
Looks good. If you're right handed, 1. connect the front sling point to the left side QD socket, just in front of the receiver, 2. connect the rear sling point to the right side QD socket (on the right side of the buttstock).
eta: Your sling appears to be a MagPul convertible 2-to-1 sling. In order to take advantage of the built in convertible QD socket of the sling, you should acquire a QD End Plate from IWC or another manufacturer, and use it as your rear QD attachment point. With the front sling mount repositioned, you'll have more access to your rail and your light. You might even want to remount your light with an MLOCK compatible one. |
AR Sponsor