AR Sponsor
Posted: 2/20/2017 8:25:57 PM EDT
|
Are there any AR makes that have better fitment or built to better tolerances than others? Mass produced or custom made make a whole lot of difference in sounding more solid versus a morraca (exageration). I know they're built to be within spec to be able to have parts swapped out easily but I'm looking to pick up my first AR and plan on learning off of it and not don't plan on changing anything... or at least not for a long while. I'm looking to spend around $2k-$2.5k and would like a quality build for me to learn all the basics off of.
Uses for the AR will be everything. I'd like for it to be a do-it-all weapon if that's possible. |
|
If 2k to $2500 is your total budget I would look at Daniel Defense and get a nice optic / mount.
If not, check out KAC SR-25 http://www.knightarmco.com/sr-25-e2-advanced-combat-carbine/?cate_cm=commercial&term=sr-25&features=sr-25-e2-acce |
| Have been around firearms since early childhood shooting handguns, bolt actions, AR's and shotguns. Couple of years high school rifle team when they still used bolt action .22's... apparently they use air rifles now? Have only owned a Ruger 10/22 and a Ruger Deerfield. For the last 20+yrs I've been on a archery kick so it's been a while since I've smelled gunpowder. |
|
Quoted:
Have been around firearms since early childhood shooting handguns, bolt actions, AR's and shotguns. Couple of years high school rifle team when they still used bolt action .22's... apparently they use air rifles now? Have only owned a Ruger 10/22 and a Ruger Deerfield. For the last 20+yrs I've been on a archery kick so it's been a while since I've smelled gunpowder. Sadly I live in Hawaii (sounds weird right?) where firearms laws are a tad stringent. Ah, I lived there for almost 11 years--in fact I left only a few months ago. I would still say get a decent "mid-grade" (my vote is still Colt, and check this one out. I know you're kind of at the mercy of the four gun shops their (which island do you live on, btw?), but you should still be able to order something. Do you already have your long-gun permit? I can give you some tips for that as well, if you need them. Once you have the gun you want, check these guys out. They are the closest thing you're gonna get to a regular offering of "tactical training." Not all of them are all they claim to be, but I haven't heard anything so awful that I would say they're not worth your time. There is another company out there, but I don't know if they still only do LE/Mil, or if they started offering open enrollment. If you want, I can ask for you. I attended some training from them a couple years ago, and they are really good. There are also a couple ISPC and IDPA clubs out there too, so you might be able to check with them. HDF's website usually has some pretty good info about the firearms scene over there. |
|
Quoted:
I'm on Maui. Gun shops are limited for sure. I've gotta make my way into the station to apply (renew) for my permits but figured I could stand to do some research in the mean time. Maui is the one island I spent the least amount of time on. Truth be told, I'm not too familiar with the view on guns over there. Do you guys have any public/private ranges? |
| You want a nice gun with good fit and finish, i get it. You cant go wrong with a Daniel Defense, LWRCI, LMT, or BCM. If it were me, Id pick up a Noveske. I'm partial though. I love mine. They are definitely worth it IMO. However, It may be wise to get a 6920 and take some courses... But Its your call brother. |
|
If I was to suggest a friend with a first time AR556, I would go with either one of two options. I would either go with the Bravo Company BFH 14.5" Mid Length Upper Receiver Group w/ BCM KMR ALPHA 13" Handguard with a muzzle device pin and welded to give you the legal (without a tax stamp) 16+ inches.
Hands down I think it is the best bang for your buck upper out there. Everything is mil-spec so you know it's going to run hard (which you will need since it's your first one). If you have any questions about the upper specifically and why I think it's the one for you, let me know. I've seen Daniel Defense, Knights Armament, and Lewis Machine and Tool mentioned in the above. I think they are great options but for your first one, I think it's better to spend a little less and get the same quality gun (all the butt hurt fan boys are going to get me for saying that) and spend a little extra on a 1-4x or 1-6x piece of glass, optic mount, mags, and ammo. With that upper, you will need to purchase a lower separately. I personally don't think who makes the upper is as big of a deal as some people make it. I think most people like to match if they are fan boys. I think your FCG, pistol grip, and stock are the most important components of your lower. I would honestly just find a no frills stripped lower and assemble the lower from a reputable lower parts kit (minus trigger and pistol grip). Because I am a fan of the BCM gunfighter stock (I think it's minimalist where it's needed but still has enough for proper shouldering and cheek weld), I would go with the BCMGUNFIGHTER™ Stock Kit (saves yourself the hassle of sourcing the tube, buffer, spring, castle nut, and end plate separately). Pistol grip is really whatever you think feels good in the hands. I find the Magpul MOE K2+ to be the most ergonomic (I run it on all my guns). Last but not least, your FCG. The best bang for your buck trigger, in my opinion, is the Geissele 2 Stage Trigger. When buying factory guns, I always find there are the little things you want to change out. I think the above combination of parts will give you the best option for your first AR right off the bat. |
AR Sponsor