AR Sponsor
Posted: 8/15/2011 10:17:26 AM EDT
|
The PIF thread in the retro section has been going on for some time now, lets try to keep pace!
RULES ARE, YOU ASK FOR PART THEN YOU POST UP AN ITEM TO PAY IT FORWARD. NO A2 PISTOL GRIPS!!!!! 1. Like New Black Delta Ring (No Spring, or Clip) 2. .750 FSB (Complete with FSA) sling swivel, set screws, no Bayonet Lug. GONE 3. Bushmaster A2 stock body w/spacer and trapdoor plate GONE IF YOU WANT AN ITEM PLEASE USE THE EMAIL BUTTON TO CONTACT ME, THANK YOU.... |
|
I'd like the stock body, spacer and butt plate. Will put up an item or two have to check stash and can only get to PO once a week so patience please. E-mail sent on stock.
1- Black A-2 sling with compression hooks Gone 1-cage 1005-01-368-9852 M-4 black sling in opened govt package. Basically a brand new silent sling (just a few inches longer) still available. Gone Same as above contact by e-mail if you want an item. Thanks |
|
2. .750 FSB (Complete with FSA) sling swivel, set screws, no Bayonet Lug.
I'll take the .750 FSB and offer up an inexpensive (non-Colt) set of A2 rifle handguards. Not the best but usable for a display or truck gun, and I will include free of any charge one of the much maligned and unwanted A2 grips to go along with the set of handguards!!! If you want them post here and send me an e-mail with your info ...Thanks....<><....:) |
|
Quoted:
I'd like the stock body, spacer and butt plate. Will put up an item or two have to check stash and can only get to PO once a week so patience please. E-mail sent on stock. 1- Black A-2 sling with compression hooks 1-cage 1005-01-368-9852 M-4 black sling in opened package Same as above contact by e-mail if you want an item. Thanks I'll take the black A2 Sling with compression hooks, IM w/ my address. ETA: Both Items will be shipped Monday August 21st....... 
I still have Item # 1. Delta Ring available. |
|
OK, I'll add another item in hopes of getting this moving.......
1. Delta-Ring (From Previous Post) 2. Thin Carbine length Hand Guards, single shield, 7 holes. (has a small hole drilled in the bottom HG where a rail was added). 
PLEASE USE THE EMAIL BUTTON TO REACH ME IF YOU WANT AN ITEM, AFTER POSTING AN I'LL TAKE IT HERE..... |
|
MSPRet, I'd like the used A-2 HG's if you still have them. E-mail sent. I'll put up a NOS BM I'm pretty sure A-2 flash hider less washer.
1- NOS BM A-2 flash hider less washer. As above send e-mail with information. Please be patient on shipping as I only get to PO once a week. |
|
Quoted:
1. CQB Notch/Peep rear battle aperture I'll take it, I think I can put it to good use. I can offer up a stock sling swivel screw and I think I have a peel washer to go with Cden's A2 FH. The washer was hand-tightened behind a three-prong flash hider, but all the layers are still there so it should be usable. Maybe a few more small parts but let me get home and take a look first. ETA: Best way to contact me is via E-mail. |
|
Quoted:
Quoted:
1. CQB Notch/Peep rear battle aperture I'll take it, I think I can put it to good use. I can offer up a stock sling swivel screw and I think I have a peel washer to go with Cden's A2 FH. The washer was hand-tightened behind a three-prong flash hider, but all the layers are still there so it should be usable. Maybe a few more small parts but let me get home and take a look first. ETA: Best way to contact me is via E-mail. Email sent......It's yours.
Items Left 1. CAR Handguards. 2. Delta Ring. 3. Beat-up A2 Handguards..... 1 is missing the heat shield. |
|
Der Hans,
The CQB Aperture shipped out today.....10/03/11......
Augee, Handguards are yours, I gotta dig them out and Please Email me your Info... PLEASE USE EMAIL BUTTON TO CONTACT ME Come on guys dig through your stuff, I'm putting up items weekly...Try and Help me get this great thread tacked. PIF ITEMS 1. A1 Flash Hider Can be used on a C7/C8 Build or Transitional A2 2. Black Delta Ring 3. CAR Hand Guards |
|
Been offline for some time, just checking the A2 forums and not a lot has changed. I sent out what I believe to be the last of what was asked for. Only thing that is bothering me is the lack of participants other than the frequenters, I'm hoping to expand this into a tighter community and the more you help, the more you get back. Please do your part and be generous; with the holidays coming up. When would be a better time to give a little to help out those trying to get something together for a younger shooter??
|
|
I would like to jump in on this thread and offer up a few items that have been collecting dust in my parts bin
#1) Old Style 4-Pos Stock Body with Rubber Butt Pad. No tube, buffer or spring. Gone to PoleCat30 #2) New Style 6-Pos Stock Body with Rubber Butt Pad, No tube, buffer or spring. Includes a set of CARBINE small diameter hand guards. Both have been Camo Painted. #3) One fairly new set of Mid-Length Hand Guards. Taken off to replace with a MOE hand guard. Heat Shields intact. Like new. #4) Cheap UTG 4-Rail Carbine Length Hard Guard. Cheap & Heavy, but functional. #5) 6 5 Each of the Standard A2 Pistol Grip. 1 Gone to PoleCat30 Please IM me if your interested. Will only mail via United States Postal Service... Thanks |
|
Quoted:
I would like to jump in on this thread and offer up a few items that have been collecting dust in my parts bin #3) One fairly new set of Mid-Length Hand Guards. Taken off to replace with a MOE hand guard. Heat Shields intact. #4) UTG 4-Rail Carbine Length Hard Guard. Cheap & Heavy, but functional. Thanks I'll take UTG 4 Rail Carbine Length Hand Guard.Email sent ETA: I have......... 1. Black Delta Ring 2. Birdcage Flash Hider 3. skinny carbine hand guards |
|
Quoted:
I would like to jump in on this thread and offer up a few items that have been collecting dust in my parts bin #1) Old Style 4-Pos Stock Body with Rubber Butt Pad. No tube, buffer or spring. Gone to PoleCat30 #2) New Style 6-Pos Stock Body with Rubber Butt Pad, No tube, buffer or spring. Includes a set of CARBINE small diameter hand guards. Both have been Camo Painted. #3) One fairly new set of Mid-Length Hand Guards. Taken off to replace with a MOE hand guard. Heat Shields intact. Like new. #4) Cheap UTG 4-Rail Carbine Length Hard Guard. Cheap & Heavy, but functional. Gone to HipShOT #5) 6 5 Each of the Standard A2 Pistol Grip. 1 Gone to PoleCat30 Please IM me if your interested. Will only mail via United States Postal Service... Thanks |
|
Quoted:
I would like to jump in on this thread and offer up a few items that have been collecting dust in my parts bin #1) Old Style 4-Pos Stock Body with Rubber Butt Pad. No tube, buffer or spring. Gone to PoleCat30 #2) New Style 6-Pos Stock Body with Rubber Butt Pad, No tube, buffer or spring. Includes a set of CARBINE small diameter hand guards. Both have been Camo Painted. #3) One fairly new set of Mid-Length Hand Guards. Taken off to replace with a MOE hand guard. Heat Shields intact. Like new. Gone to 04REX #4) Cheap UTG 4-Rail Carbine Length Hard Guard. Cheap & Heavy, but functional. Gone to HipShOT #5) 6 5 Each of the Standard A2 Pistol Grip. 1 Gone to PoleCat30 Please IM me if your interested. Will only mail via United States Postal Service... Thanks |
AR Sponsor