Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
AR Sponsor
11/10/2011 1:37:34 PM EDT
In addition to our new .625 Lite piston system, we are now offering a lightweight gas system for the standard .750” diameter barrel.  Now more customers can enjoy a lighter system, no matter which barrel diameter they have, .625” or .750”.  




Weighing approximately ¼ less than our current retro-fit gas block, this new lightweight gas block will make a noticeable difference on your AR upper.  

If you are trying to accomplish some weight reduction on your current set up, combining this system with a lighter rail/handguard will definitely be the way to go.



The system features all of the high quality Adams Arms parts, already available in our current system, along with a minimized gas block for a sleeker look and lower weight.  



This is still an end user install system and can be installed on any mil-spec AR upper with a .750 diameter barrel.  There is no gunsmithing required and no permanent modifications needed.  

Available in Carbine Length (Retails for $369), Mid Length (Retails for $376), and Rifle Length (Retails for $384), this system will be a great upgrade to any mil-spec AR upper.  

This new .750 Lite system includes the following parts:

1 Gas Block (with 2 set screws)
1 Drive Rod (with spring and bushing)
1 Gas Plug
1 One Piece Bolt Carrier
1 Receiver Bushing
1 Bolt Spring
1 Dowel Rod (for installing the receiver bushing)
1 Installation DVD

Currently these systems are only available through one of our preferred dealers listed below.  
This is the first run on a new product so supplies are limited.  Get yours before they are gone!

Coleman Tyler – [email protected]
Elite Tactical Components – [email protected]
Rainier Arms – [email protected]
Riflegear – [email protected]
Western Sport – [email protected]

11/10/2011 1:59:42 PM EDT
[#1]
Nice! is the .308 next?
11/17/2011 5:42:33 AM EDT
[#2]
It's probably not going to be next, but it is coming.  

These, however, began shipping at the beginning of the week along with the new .625 Lite systems.  We've been getting request for these systems a bit longer than we've been getting request for the .308 so this system came first.

11/23/2011 9:49:43 AM EDT
[#3]
Quoted:
Nice! is the .308 next?


That's the plan.  Ran into some production issues which pushed us back.  We'd rather have it take longer than expected and it be correct than to rush something through and it not be right.
12/11/2011 8:44:03 PM EDT
[#4]
How long is the gas block? My lightweight barrel was turned down and is only .750 for as long as a low-pro gas block.
12/13/2011 6:41:13 AM EDT
[#5]
It is the standard gas block length.  It requires at least a 2" shoulder on the barrel for proper installation.
AR Sponsor