AR Sponsor
Posted: 5/4/2014 5:57:18 AM EDT
| Does anyone know if there is someone that can reprofile an A2 lower to an A1 lower and do a refinish? |
|
Quoted:
Does anyone know if there is someone that can reprofile an A2 lower to an A1 lower and do a refinish? .sounds like you are talking about a completed A2 lower, not an 80%'er? There are a couple guys that can do 80% A2's to A1 reprofile, but they don't have FFL's ,so could not do the same to a completed lower. Not sure of anyone with an FFL that does it. |
|
What about a Nodak Spud retro lower? Any reason you want to rework something that would wind up more difficult and expensive? |
|
Quoted:
What about a Nodak Spud retro lower? Any reason you want to rework something that would wind up more difficult and expensive? http://www.nodakspud.com/AR%20Lowers.htm I have one on order, but it is unknown when it will ship. I would like to have something in the meantime |
|
Quoted: .... I have one on order, but it is unknown when it will ship. I would like to have something in the meantime Gotcha. I didnt know what you were after. From my reading, once you reprofile, you would need to reannodize, and possibly engrave depending on the project. I didnt want you to go down a long and expensive path that would be equivalent to a Nodak for 3x the price. Edited to add: If its the wait you want to avoid, you might want to keep your eyes out for a Nodak on the EE. It seems one was sold just yesterday... |
|
Quoted:
Gotcha. I didnt know what you were after. From my reading, once you reprofile, you would need to reannodize, and possibly engrave depending on the project. I didnt want you to go down a long and expensive path that would be equivalent to a Nodak for 3x the price. Edited to add: If its the wait you want to avoid, you might want to keep your eyes out for a Nodak on the EE. It seems one was sold just yesterday... http://www.ar15.com/forums/t_7_158/1308279_Almost_New_Nodak_NDS_16A1_lower.html Quoted:
Quoted:
.... I have one on order, but it is unknown when it will ship. I would like to have something in the meantime Gotcha. I didnt know what you were after. From my reading, once you reprofile, you would need to reannodize, and possibly engrave depending on the project. I didnt want you to go down a long and expensive path that would be equivalent to a Nodak for 3x the price. Edited to add: If its the wait you want to avoid, you might want to keep your eyes out for a Nodak on the EE. It seems one was sold just yesterday... http://www.ar15.com/forums/t_7_158/1308279_Almost_New_Nodak_NDS_16A1_lower.html Yup, I miss it. I am pissed. |
AR Sponsor