AR Sponsor
Posted: 3/29/2007 9:07:31 AM EDT
|
So, I am considering building using a "slabside" upper with the small pivot pin hole, and a "slabside" lower with the same size pivot pin hole (no mag fence, no place for the pivot pin detent/spring to be captured). Is there a vendor that sells the smaller "screw type" pivot pin to fit this combination? I have seen the ones to mate larger with smaller holes, but I'm thinking all the holes will be the same size. Mark |
Here or just watch the EE. They pop up from time to time. |
|
I had a similar problem but decided to go with a pin that has a detent ball in it. Try this thread for info. My upper is large pin so I'll sleeve the upper front hole part way with a steel sleeve and use the detent pin. http://www.ar15.com/forums/topic.html?b=3&f=123&t=321543 |
AR Sponsor