User Panel
User Panel
User Panel
|
Posted: 11/9/2016 1:44:06 AM EDT
Please share your 7.62x39mm built result.
Specification: YHM flash hider YHM Barrel YHM handguard YHM Gas block YHM strip upper Aim Surplus bolt carrier with LMT bolt Spike strip lower ASC magazine (older version, not reliable) Promag pistol grip Upper receiver was spray paint (appliance epoxy) and cooked at 350 degree for 30 minutes to reduce glossy finish. |
|
|
|
Posted: 11/9/2016 2:18:29 AM EDT
[#1]
My upper will be here Friday I believe. Still need to find some mags and decide on a color!
Who did your upper @travinh |
|
|
|
Posted: 11/9/2016 7:52:33 AM EDT
[#2]
|
|
|
|
Posted: 11/9/2016 1:00:31 PM EDT
[#3]
Quote HistoryDamn! I have some of the old franken mags but I never could find a franken drum...I really wish I had one of those... |
|
|
|
Posted: 11/9/2016 1:13:51 PM EDT
[#4]
Quote HistoryReally like your mag & drum. Do both have the bolt hold open on the last round feature? Is there any instructions out on the web regarding how to build this mag? |
|
|
|
Posted: 11/9/2016 3:18:21 PM EDT
[#5]
Quote HistoryQuoted:
Really like your mag & drum. Do both have the bolt hold open on the last round feature? Is there any instructions out on the web regarding how to build this mag? Quote HistoryQuoted:
Really like your mag & drum. Do both have the bolt hold open on the last round feature? Is there any instructions out on the web regarding how to build this mag? I bought three USA drums at a gun show just after the 94 ban, none worked because of tip drop. I was really pissed and even though I had a chunk of change invested I was determine to make them work. I cut them apart and reworked them to increase the mag angle to eliminate the tip drop. They do not hold the bolt open, I was working on a Beta type mechanism but lost interest in finishing that part of the project. I have written some articles in the past about it as there were many folks at the time who said it could not be done. I believe I was the first with success To avoid re-inventing the wheel I will see if I can find them. Most were written on arfcom, someone with strong search foo might try to find them, they'd be a decade old or so. One of the few conversions I've done/had that I'd stake my life on. Iif you live near me you hear me empty a couple drums the first morning of rifle season warning poachers about where they tread. |
|
|
|
Posted: 11/10/2016 11:40:20 AM EDT
[#6]
Anderson Receivers Faxon 16" barrel with pinned on gas block from AIM (package deal with barrel) AIM BCG CMMG LPK Anderson UPK with dust cover from somewhere else C Products mags |
|
|
|
Posted: 11/10/2016 1:44:08 PM EDT
[#7]
Original old school, pair of Colt R6830s
|
|
|
|
Posted: 11/10/2016 3:48:41 PM EDT
[#8]
Quote HistoryAnd happy switch and a drum!!! 
|
|
|
|
Posted: 11/10/2016 4:20:15 PM EDT
[#9]
Are the mods going to link this thread here? http://www.ar15.com/forums/t_3_121/492214_AR15_Variants__Links_to_picture_threads.html
And do that thing so it doesn't go to archives? |
|
|
|
Posted: 11/10/2016 5:20:18 PM EDT
[#10]
|
|
|
|
Posted: 11/10/2016 5:33:59 PM EDT
[#11]
Quote HistoryQuoted:
I bought three USA drums at a gun show just after the 94 ban, none worked because of tip drop. I was really pissed and even though I had a chunk of change invested I was determine to make them work. I cut them apart and reworked them to increase the mag angle to eliminate the tip drop. They do not hold the bolt open, I was working on a Beta type mechanism but lost interest in finishing that part of the project. I have written some articles in the past about it as there were many folks at the time who said it could not be done. I believe I was the first with success To avoid re-inventing the wheel I will see if I can find them. Most were written on arfcom, someone with strong search foo might try to find them, they'd be a decade old or so. One of the few conversions I've done/had that I'd stake my life on. Iif you live near me you hear me empty a couple drums the first morning of rifle season warning poachers about where they tread. Quote HistoryQuoted:
Quoted:
Really like your mag & drum. Do both have the bolt hold open on the last round feature? Is there any instructions out on the web regarding how to build this mag? I bought three USA drums at a gun show just after the 94 ban, none worked because of tip drop. I was really pissed and even though I had a chunk of change invested I was determine to make them work. I cut them apart and reworked them to increase the mag angle to eliminate the tip drop. They do not hold the bolt open, I was working on a Beta type mechanism but lost interest in finishing that part of the project. I have written some articles in the past about it as there were many folks at the time who said it could not be done. I believe I was the first with success To avoid re-inventing the wheel I will see if I can find them. Most were written on arfcom, someone with strong search foo might try to find them, they'd be a decade old or so. One of the few conversions I've done/had that I'd stake my life on. Iif you live near me you hear me empty a couple drums the first morning of rifle season warning poachers about where they tread. Getting close: http://www.ar15.com/archive/topic.html?b=3&f=121&t=327648 http://www.google.com/search?biw=1600&bih=720&q=site%3Aar15.com+Carbinekid+drum |
|
|
|
Posted: 11/10/2016 8:51:44 PM EDT
[#12]
It's meant to be a 100%-of-the-time suppressed gun. Brake is there for a small bit of blast baffle protection. |
|
|
|
Posted: 11/11/2016 8:43:23 AM EDT
[#13]
Quote HistoryQuoted:
Original old school, pair of Colt R6830s http://img.photobucket.com/albums/v79/SD70MAC/Guns/R6830.jpg http://img.photobucket.com/albums/v79/SD70MAC/Guns/ColtSporter-1.jpg http://img.photobucket.com/albums/v79/SD70MAC/Guns/R6830s.jpg Pretty!! |
|
|
|
Posted: 11/11/2016 8:52:10 AM EDT
[#14]
We approve of many of these builds.
|
|
|
|
Posted: 11/14/2016 1:29:26 PM EDT
[#15]
|
|
|
|
Posted: 11/23/2016 9:20:52 PM EDT
[#16]
KAK 18" 7.62x39 Value-Line mid-gas barrel, AIM nitride BCG, Midwest Ind 15" M-LOK, AD Scout QD scope mount, Vortex CF2 4-16x50, Precision Armament M4-72 brake, SLR Sentry 7 adj gas block, BCM ambi CH, Geissele SSA-E, Norgon ambi mag catch.
(same pic as posted in the KAK barrel thread) |
|
|
|
Posted: 11/25/2016 10:16:06 PM EDT
[#17]
CBC complete upper for $360 and it works very well through 400 rounds of 123gr Barnaul monarch. 30% off sale I had a major issue with mine (misplaced gas block) and posted the full review in this sub-forum but CS was good and it came back gtg. Anyway, I'm excited to test it @ 200-400m to see if the holds on my Weaver1-5x24 CIRT reticle work as well as I believe they should. It seems Weaver accidentally made a bdc reticle that fits 7.62x39 in metric (which I prefer to use). According to the Hornady ballistic calculator, the drops for a .26bc 123gr round @ 715m/s are 1mil(200m), 2.7(300m), 4.9(400m), 7.8(500m) when zeroed @ 100m. The corresponding holds on the reticle are 1, 2.6, 4.9, 8. I don't ever plan on using 500m and probably only testing 400m but the 200 and 300 will come in handy. I put the MBT in a plain A2 Bushmaster lower for $1100 total and am happy with a fun, inexpensive plinker/hunter. It would have been $900 with the planned Tac30 but I had to stick with the Weaver since it seems made for the job. EDIT: Radical upper/AIM nitride bcg with Bushmaster A2 lower, MBT, and Weaver 1-5 - $1100 CBC upper with PA dot, Amazon/UTG mount, PSA lower with STR/EPT kit - kept this under $700 which was the original idea with a cheap 7.62x39 plinker. RF is |
|
|
|
Posted: 11/26/2016 3:12:14 AM EDT
[#18]
AR Stoner A3 complete upper with heavy 16" bbl from Midway (Black Friday sale now for $280), AR Stoner tube, 80% lower, Midwest Industries 9" SP M-LOK handguard, Magpul CTR stock, Ergo grip, Geissele G2S, Sightmark Ultra-Shot M-Spec red dot, Black Rain adjustable gas block.
http://i1014.photobucket.com/albums/af269/p8phellfire3/001.jpg This is my first camo job, done with Duracoat, based on this scheme: http://www.houtsenterprises.net/dur_bengal.html I just changed the colors to work with Colorado mountains, using T3 Tactical Coyote Brown and T15 Tac Foliage Green with some white airbrushed across the tiger stripes to dull them and add some light contrast on the overlap. Topped everything off with Duracoat Matte Clear. Jonno |
|
|
|
Posted: 11/26/2016 3:49:31 AM EDT
[#19]
Quote HistoryQuoted: AR Stoner A3 complete upper with heavy 16" bbl from Midway (Black Friday sale now for $280), AR Stoner tube, 80% lower, Midwest Industries 9" SP M-LOK handguard, Magpul CTR stock, Ergo grip, Geissele G2S, Sightmark Ultra-Shot M-Spec red dot, Black Rain adjustable gas block.
http://i1014.photobucket.com/albums/af269/p8phellfire3/001.jpg This is my first camo job, done with Duracoat, based on this scheme: http://www.houtsenterprises.net/dur_bengal.html I just changed the colors to work with Colorado mountains, using T3 Tactical Coyote Brown and T15 Tac Foliage Green with some white airbrushed across the tiger stripes to dull them and add some light contrast on the overlap. Topped everything off with Duracoat Matte Clear. Jonno 
|
|
|
|
Posted: 11/26/2016 5:10:24 AM EDT
[#20]
 |
|
|
|
Posted: 11/27/2016 2:58:32 PM EDT
[#21]
Green Mountain chrome lined barrel, Anderson lower, generic upper, Magpul furniture, PSA enhanced firing pi (doesn't work on steel cased ammo), unknown bolt from E&E.
|
|
|
|
Posted: 11/30/2016 5:05:33 PM EDT
[#22]
|
|
|
|
Posted: 11/30/2016 6:28:31 PM EDT
[#23]
Quote HistoryQuoted:
<a href="https://flic.kr/p/PKxJpD" target="_blank">https://c4.staticflickr.com/6/5333/31341568555_6042ac7ce1_b.jpg</a> Sick build! |
|
|
|
Posted: 12/1/2016 8:24:38 PM EDT
[#24]
Noveski N4 lower and upper reciever
9" Green Mtn x39 barrel B.A.D. VERT PDW Stock Odin O2 hand guard Adj Gas Block 2.5" OTB brake 10" .30 cal Supressor Larue trigger Enhanced firing pin  Attached File |
|
|
|
Posted: 12/1/2016 8:29:46 PM EDT
[#25]
Niiiice. You running subs?
|
|
|
|
Posted: 12/1/2016 8:41:55 PM EDT
[#26]
I have only run super and it runs great. Wolf and golden tiger.
|
|
|
|
Posted: 12/3/2016 4:55:12 PM EDT
[#27]
Quote HistoryQuoted:
Green Mountain chrome lined barrel, Anderson lower, generic upper, Magpul furniture, PSA enhanced firing pi (doesn't work on steel cased ammo), unknown bolt from E&E. http://img.photobucket.com/albums/v374/PutnamW/DSC03333.jpg What mag is that and is it reliable? |
|
|
|
Posted: 12/3/2016 7:37:47 PM EDT
[#28]
Radical Firearms 7.62x39 pistols. 2 Each.
|
|
|
|
Posted: 12/3/2016 7:42:01 PM EDT
[#29]
Older CMMG mutant pic. Giselle trigger. Look different now
|
|
|
|
Posted: 12/3/2016 9:39:33 PM EDT
[#30]
|
|
|
|
Posted: 12/5/2016 9:49:22 AM EDT
[#32]
Quote HistoryQuoted:
Optic on the way What upper, handguard, and flash hider are those? |
|
|
|
Posted: 12/5/2016 10:59:26 AM EDT
[#33]
Quote HistoryQuoted:
What upper, handguard, and flash hider are those? Quote HistoryQuoted:
Quoted:
Optic on the way What upper, handguard, and flash hider are those? It's a PSA KS47 build kit on a regular lower. It was a black friday special and total cost was about $600. I'm very happy with it to say the least. |
|
|
|
Posted: 12/5/2016 3:09:12 PM EDT
[#34]
PSA AR47 with Primary Arms 7.62x39 ACSS 3x prism scope
New build for ATN x sight centered around a faxon pinned 7.62x39 barrel 
|
|
|
|
Posted: 12/6/2016 5:16:39 AM EDT
[#35]
What magazines seem to be the most reliable?
|
|
|
|
Posted: 12/14/2016 4:35:13 PM EDT
[#36]
OST
|
|
|
|
Posted: 12/14/2016 7:53:26 PM EDT
[#37]
Quote HistoryQuoted:
OST OST ? |
|
|
|
Posted: 12/14/2016 8:48:04 PM EDT
[#38]
Quote HistoryQuoted:
OST ? He was tagging the post for future reference. As for mags, I've had good luck with CPD mags. I have 10 round and 28 round mags that have worked just fine. I haven't tried any other brands. These were recommended when I got my x39 upper last year. |
|
|
|
Posted: 12/14/2016 8:53:17 PM EDT
[#39]
Here's mine. PSA upper I bought a year ago on their cyber Monday sale, PSA lower, Primary Arms red dot sight. Does just exactly what I want it to do out to 100 yards. Fun blasting and with steel case ammo I don't have to chase brass.
|
|
|
|
Posted: 12/14/2016 8:57:01 PM EDT
[#40]
Sorry I am a noob but I can't get the JPG to attach for some reason. Any thoughts? Thanks for the heads-up about the 50 posts.
/Users/gpolomac/Desktop/IMG_3020.jpg PWS MK107 Diablo 7.62x39 SBR Vortex Sparc II Silencerco Saker 7.62 |
|
|
|
Posted: 12/15/2016 12:30:11 AM EDT
[#41]
Quote HistoryQuoted:
Sorry I am a noob but I can't get the JPG to attach for some reason. Any thoughts? PWS MK107 Diablo 7.62x39 SBR Vortex Sparc II Silencerco Saker 7.62 Until you get 50 posts, your pics have to be approved by 3 team members. There are instructions in the Test Post Forum under the Site Help listing. |
|
|
|
Posted: 12/15/2016 9:58:49 AM EDT
[#42]
Upper YHM 7.62x39 etched upper RCA BCG Green Mountain 16" carbine 1.95 twist barrel- dimpled Matrix Arms Foxtrot handguard 13" JoeBob's .750 gas block/ with stainless tube A2 standard flash hider Lower Daytona Tactical 80% burnt bronze Cerakote Kaw Valley Precision 4.3 Heavy buffer system Adaptive Tactical buttstock Polished Mil spec trigger job with KAW Valley reduced power trigger spring and Wolff heavy hammer spring Joe Bob's trigger/ grip screw KNS .155 Anti-rotation pins YHM Ambi safety ERGO Grip |
|
|
|
Posted: 12/16/2016 7:31:51 PM EDT
[#43]
Quote History
Quoted:
Green Mountain chrome lined barrel, Anderson lower, generic upper, Magpul furniture, PSA enhanced firing pi (doesn't work on steel cased ammo), unknown bolt from E&E. http://img.photobucket.com/albums/v374/PutnamW/DSC03333.jpg Posted by pewpew1212; What mag is that and is it reliable? Unimag by RZE. I got it from Primary Arms for $29.99. Took a little massaging to get it to fit my magwell but it has been 100% reliable. Not a single failure to feed. The owner of RZE is working to make the mags drop free. Mine was from a batch that were a little wide. |
|
|
|
Posted: 12/17/2016 10:54:02 AM EDT
[#44]
 Attached File Attached FileMy KS47, always wanted an AR styled rifle that could shoot AK mags. PSA upper w/ 16" barrel PSA KS47 lower YHM 9.7 diamond rail BCM gas block AAC muzzle device (762SD attached) ERGO grip Magpul stock Nikon P223 scope w/rings ( only scope I have available at the time) |
|
|
|
Posted: 12/17/2016 10:08:48 PM EDT
[#45]
UPPER Matrix Arms side charging upper Faxon 7.62x39 16" mid-length barrel PWS FSC Gen 2 compensating brake Superlative Arms solid .750 mid piston kit 7.62x39 bolt taken from an Aim Surplus BCG Midwest Industries LWM 10.5" handguard Primary Arms 1-6x scope w/ ACSS 7.62x39 reticle Aero Precision Ultralight SPR 30mm mount LOWER NEA stripped lower receiver Geiselle G2S trigger PSA MOE LPK, Magpul bolt/firing pin core, accu-wedge PWS Gen 2 enhanced buffer tube Wolff reduced power buffer spring; generic buffer MFT minimalist Stock C-Products Defense mags |
|
|
|
Posted: 12/18/2016 12:10:46 AM EDT
[#46]
|
|
|
|
Posted: 12/18/2016 12:19:35 AM EDT
[#47]
Thanks - I guess I don't have enough of an account history to post pics.
I should add that I just finished assembling the gun, so its still untested. I'm sure I'll need to fiddle with one thing or another, but I'm excited to get to the range. |
|
|
|
Posted: 12/18/2016 5:50:30 PM EDT
[#48]
Quote HistoryQuoted:
http://imgur.com/a/HqYCK UPPER Matrix Arms side charging upper Faxon 7.62x39 16" mid-length barrel PWS FSC Gen 2 compensating brake Superlative Arms solid .750 mid piston kit 7.62x39 bolt taken from an Aim Surplus BCG Midwest Industries LWM 10.5" handguard Primary Arms 1-6x scope w/ ACSS 7.62x39 reticle Aero Precision Ultralight SPR 30mm mount LOWER NEA stripped lower receiver Geiselle G2S trigger PSA MOE LPK, Magpul bolt/firing pin core, accu-wedge PWS Gen 2 enhanced buffer tube Wolff reduced power buffer spring; generic buffer MFT minimalist Stock C-Products Defense mags I'm curious to know how much that bad boy weighs |
|
|
|
Posted: 12/18/2016 10:42:42 PM EDT
[#49]
Unfortunately I don't have a digital scale, but I weighed it on the digital bathroom scale when I was putting it together. It read as 6 lbs even without the optic or mag, and 7.8 lbs with the optic installed and an empty mag. I won't pretent that's necessarily accurate.
More pics here. |
|
|
|
Posted: 12/23/2016 11:19:12 PM EDT
[#50]
Quote HistoryQuoted:
Quote History Unimag by RZE. I got it from Primary Arms for $29.99. Took a little massaging to get it to fit my magwell but it has been 100% reliable. Not a single failure to feed. The owner of RZE is working to make the mags drop free. Mine was from a batch that were a little wide. Where did get the RZE magazine for $29.99? I will buy a few of them if it costs $29.99 each. Thanks, Cal |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
