AR Sponsor
Posted: 6/25/2016 8:08:13 PM EDT
|
Anyone making Armalite B pattern ar10 80% lowers?
Thanks in advance, |
|
There was a company i saw last year making some. Elite Weapons something or another. Tried doing a search, it was very similar to ETS who makes the new magazines. Elite tactical something. Then there was Elk creek manufacturing, but I'm only coming up with Facebook stuff from last November.
Some people tried to make them but they didn't sell, i was searching for them last year, found those 2,then miller precision arms, but they had their site hacked and said they don't make guns anymore when i called to place an order for their receivers. Post up if find anything |
|
One place I know of is CNCGuns.
http://www.cncguns.com/projects/ar10lower.html Their jig is not cheap but it is about the only thing I know of. |
|
Quoted:
One place I know of is CNCGuns. http://www.cncguns.com/projects/ar10lower.html Their jig is not cheap but it is about the only thing I know of. I think that was a project, a one off. He eventually went with the SR25/LMT/MaTen/AR10A pattern. As far as i know anyways, i don't think he offers the AR10B for sale. |
|
Quoted:
I'll take an A pattern since pmags are cheap as long as it works with an upper from a B pattern rifle. Thanks Guys! Can't work UNLESS your get your upper modified. The B upper has mag stops in it for the GenII mags. These have to removed. There's threads with measurements and diagrams, I'll see if i can find it. People modified them to go onto SR25 lowers back in the day, doesn't hurt the integrity of the upper i don't believe. I don't have my 10B anymore, so can't give you reference. I'll try and find the pictures later. |
|
There is a outfit in CA I did some blueprint work for on a Armalite pattern receiver(s) they make both A & B patterns...
in your case its the B pattern that makes the most sense and of course takes MagPul magazines...They may have stopped making A patterns now though... I will give them a call tomorrow to see what they have in stock and/or lead times if they are backordered, etc. |
|
Quoted:
I think that was a project, a one off. He eventually went with the SR25/LMT/MaTen/AR10A pattern. As far as i know anyways, i don't think he offers the AR10B for sale. Quoted:
Quoted:
One place I know of is CNCGuns. http://www.cncguns.com/projects/ar10lower.html Their jig is not cheap but it is about the only thing I know of. I think that was a project, a one off. He eventually went with the SR25/LMT/MaTen/AR10A pattern. As far as i know anyways, i don't think he offers the AR10B for sale. He last had them for sale in January, and may still have some. They are neither A or B pattern as they do not have the mag well or FCG pocket cut. http://www.cncguns.com/news.html |
|
Quoted:
There is a outfit in CA I did some blueprint work for on a Armalite pattern receiver(s) they make both A & B patterns... in your case its the B pattern that makes the most sense and of course takes MagPul magazines...They may have stopped making A patterns now though... I will give them a call tomorrow to see what they have in stock and/or lead times if they are backordered, etc. A pattern takes Magpul/SR25 pattern mags. |
|
Thanks but don't waste your time. I would start from scratch before I did that.
Quoted:
Can't work UNLESS your get your upper modified. The B upper has mag stops in it for the GenII mags. These have to removed. There's threads with measurements and diagrams, I'll see if i can find it. People modified them to go onto SR25 lowers back in the day, doesn't hurt the integrity of the upper i don't believe. I don't have my 10B anymore, so can't give you reference. I'll try and find the pictures later. Quoted:
Quoted:
I'll take an A pattern since pmags are cheap as long as it works with an upper from a B pattern rifle. Thanks Guys! Can't work UNLESS your get your upper modified. The B upper has mag stops in it for the GenII mags. These have to removed. There's threads with measurements and diagrams, I'll see if i can find it. People modified them to go onto SR25 lowers back in the day, doesn't hurt the integrity of the upper i don't believe. I don't have my 10B anymore, so can't give you reference. I'll try and find the pictures later. |
|
Much appreciated!
Quoted:
There is a outfit in CA I did some blueprint work for on a Armalite pattern receiver(s) they make both A & B patterns... in your case its the B pattern that makes the most sense and of course takes MagPul magazines...They may have stopped making A patterns now though... I will give them a call tomorrow to see what they have in stock and/or lead times if they are backordered, etc. |
|
Quoted:
I think that was a project, a one off. He eventually went with the SR25/LMT/MaTen/AR10A pattern. As far as i know anyways, i don't think he offers the AR10B for sale. Quoted:
Quoted:
One place I know of is CNCGuns. http://www.cncguns.com/projects/ar10lower.html Their jig is not cheap but it is about the only thing I know of. I think that was a project, a one off. He eventually went with the SR25/LMT/MaTen/AR10A pattern. As far as i know anyways, i don't think he offers the AR10B for sale. I don't know about the 80% lowers but he does sell the jigs. |
AR Sponsor