Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
AR Sponsor
12/5/2015 11:52:06 PM EDT
Thinking about picking up a DPMS LR 308 for my son for Christmas. Decent price $750? Don't have much experience with DPMS
I realize this model is an entry level AR-10, and should probably switch out the trigger mech. Any other thoughts from you guys

Thanks
Loaded247
12/5/2015 11:55:33 PM EDT
[#1]
Put a free float hand guard on it, and a Geissele g2s trigger, and shoot at distance.



I shot .83 MOA 25 shot group screwing around with mine on the MOA all day Challenge a few years ago.
12/6/2015 12:01:45 AM EDT
[#2]
Thanks for the info. I will take a look at those triggers and get a free float for it.

Loaded247
12/6/2015 12:08:30 AM EDT
[#3]
Gas block needs to be replaced if it's aluminum.







12/6/2015 1:19:34 AM EDT
[#4]
I've got a couple alum gas blocks on prairie dog rifles just like the one in your post with several thousand rounds through each and they are just as dirty, but why the need to replace? The leakage may be due to the alum having a different expansion rate than the barrel steel?
12/6/2015 9:32:12 AM EDT
[#5]
I had a DPMS Oracle in 308. Not a bad rifle to own. Easy to upgrade when your ready. I had a Timney trigger in mine as I preferred a single stage. It may not be top of the line but a platform to build from.
12/6/2015 12:35:48 PM EDT
[#6]
They're good to go.

12/6/2015 7:37:57 PM EDT
[#7]
too bad you didn't look during black Friday,,, DPMS was having a sale 200 dollars MIR off rifles... that would have made the G2 308 $800 something
12/6/2015 8:03:11 PM EDT
[#8]
Quote History
Quoted:
I've got a couple alum gas blocks on prairie dog rifles just like the one in your post with several thousand rounds through each and they are just as dirty, but why the need to replace? The leakage may be due to the alum having a different expansion rate than the barrel steel?
View Quote

Yes, coefficient of thermal expansion is different between steel and aluminum.

In .223, I saw a DPMS Lo-pro Classic go a for a few thousand rounds before the gas block eroded.

The one in the picture above was on a .308, and eroded within a few hundred rounds, with some of that suppressed.

Just use steel and don't look back.  These 6061 aluminum gas blocks are great for tool time and tool head life on machines, but bad for longevity.  For lower volume plinking or P-dog blasting, you'll be able to get away with them for much longer, maybe never have an issue like I've seen with multiple guns that start short-stroking once they lose enough pressure from the gas system.
12/6/2015 9:27:06 PM EDT
[#9]
Quote History



clean no-nonsense weapon. is that an older 3g1?
12/7/2015 8:52:47 PM EDT
[#10]
I have a DPMS Oracle (that's how it started out). The upper, lower, and barrel are all stock and it shoot's 1/2 MOA at 100 yards with factory 168gr ammo. I've had groups of 3 shots just touching each other when I do what I should. But for me that's the exception not the usual.  I can still get 3-5 shots into less than 1/2 MOA at 100 yards, if I really concentrate on my technique!!! They're GTG as far as I'm concerned!!
12/8/2015 7:50:53 PM EDT
[#11]
Replaced alum gas block and free floated barrel shoots great
AR Sponsor