AR Sponsor
Posted: 3/4/2015 10:02:40 PM EDT
|
So before we get started what bolts are you guys running in your 6.5 Creedmoor's since the stock DPMS firing pin hole size will show premature pressure signs. I was looking at the JP and the fulton armory which both run a smaller diameter firing pin hole.
But lets get right into the new build ! So for hand guard I will be going with the SLR solo Mega Maten set SD-E trigger PRS blah blah and the rest of the boring normal stuff But here is the business side. 24" heavy contour 6.5 creedmoor. heavy contour is on the left and a lighter contoured 20" on the left. http://i1223.photobucket.com/albums/dd501/golfpro64/lilja%206.jpg http://i1223.photobucket.com/albums/dd501/golfpro64/lilja%203.jpg |
|
Quoted:
They look awesome. What length gas systems on each? They are both Rifle Length this is a little project with Lilja rifle barrels. There is a 18" and 20" that are .750 at the gas block the 24" is .936 at the block if any of their previous works stays true these should be some rather fun barrels to really get out there. 
|
| I'm really curious to learn how each barrel treats the brass given the pressure curve of the Creedmoor. I suspect that with the 24" you'll see some slight ejector swipes on the brass, like I do with mine, but I'll keep my fingers crossed for you that the 20" runs more smoothly with the shorter dwell time. |
AR Sponsor