AR Sponsor
Posted: 5/30/2010 4:28:07 PM EDT
|
Been researching the AR 308 for a build. Decided upon DPMS for several reasons. I have looked at all the posts that describe compatibility issues with the DPMS 308 and AR 15s. Seems I see many types of handguards on DPMS 308s, so I am inclined to think AR15 forearms are compatible with the DPMS 308, but I dont remember reading if they are. So, are they?
If so, what is a good source for a selection of basic free float handguards for DPMS 308? |
|
AR15 handguards will not work on the LR-308.. the barrel nut is much bigger.
Since you are building.. use a Fulton upper receiver.. the DPMS flat tops have a lower rail than EVERY OTHER .308 AR in existence.. so the rails only match up with DPMS products.. I have a Troy on my DPMS.. the height difference is noticable.. and if you need the rails to be continuous all the way.. then you need to get a different upper.. or buy one of the DPMS rails. On the flip side.. the Troy MRF-308 is an awesome handguard, very impressed with it. |
|
Thanks for the answer.
I have been noticing the handguard rails connect to the uppers. Like with the Kinghts Armory M-110. Not sure why this is important. On my AR15 I dont mount my scope to both the receiver and handguard. I am getting the Fulton Armory upper, and will check out the Troy handguard. |
AR Sponsor