AR Sponsor
[ARCHIVED THREAD] - KX5 release when? (Page 1 of 2)
Posted: 11/30/2013 7:06:21 PM EDT
|
any of you know when the KX5 will be available.. using it to finish my SBR build.. I spoke to Noveske and while super nice the answer is vague... anyone know how soon we can expect to see this thing?
thanks.. |
|
KX3 adds the same length as a KX5
http://shopnoveske.com/products/kx5-flash-suppressor-w-crush-washer KX3 Nitride Finish 4.5 ounces 1.2 inch Dia 3.25 inch OAL I have read that the KX3 adds about 2.5 inches.. and not all rails are measured the same.. so your barrel + device then physically measure the rail.. I I have a 7.5in barrel + the KX3 (around 2.5in) to get you to around 10in.... my rail is a hair over 9inches... hope that helps.. |
|
I don't blame Noveske for not releasing a certain date, look at what happens to Magpul when they give an ETA.
Regarding the shot shown above, I don't recall the length, it was something I threw together for a quick picture, and then immediately pulled it apart for another project. I do know that with that shot I had to shim the barrel a bit to get the KX5 to stand out that far. I don't consider it a big deal, but wanted to point it out. This might have been a 10 or 11.5 on a 13.5. Sorry I'm not more help on this one. I need to give Noveske a call anyway, so I'll see if I can get a better time frame for you on the release, last I heard it should have been in the next week or so but that wasn't anything official. |
|
I get the whole date thing like with Magpul... but the thing is here they are produced on some level... people have them.. they were "shipping soon" since like a month ago... I get production is not an overnight situation... and I have no issues with Noveske they are always super nice when I talk to them...
we are just excited to get the product.. in my case at least it is the last piece I need to be able to run my gun.. lol |
|
Quoted:
I get the whole date thing like with Magpul... but the thing is here they are produced on some level... people have them.. they were "shipping soon" since like a month ago... I get production is not an overnight situation... and I have no issues with Noveske they are always super nice when I talk to them... we are just excited to get the product.. in my case at least it is the last piece I need to be able to run my gun.. lol No, people don't have them. If you mean me, I don't qualify as human being that my heart is black and shrunken, and I was never issued emotions beyond sarcasm. I am so deeply involved in multiple aspects of the firearm industry that I don't count. 
|
|
Below I have some pics of the soon to be released KX5.
The set up below is a 12" barrel with a 13.5 NSR It sticks out 1.75" past the rail. There is still some barrel past the receiver so total length is slightly shorter The KX5 length is 3 3/8" long. Based on these measurements I have figured: A 13.7" barrel + KX5 = 16.1" +/-. If you add a 15" NSR it will stick out 1.25" +/- A 14.5" barrel + KX5 = 16.9" +/-. If you add a 16.7 NSR it will stick out roughly 1" +/- ( I have this build coming so I will take some finished pics) Hope this helps 
|
|
Quoted:
No, people don't have them. If you mean me, I don't qualify as human being that my heart is black and shrunken, and I was never issued emotions beyond sarcasm. I am so deeply involved in multiple aspects of the firearm industry that I don't count.
Quoted:
Quoted:
I get the whole date thing like with Magpul... but the thing is here they are produced on some level... people have them.. they were "shipping soon" since like a month ago... I get production is not an overnight situation... and I have no issues with Noveske they are always super nice when I talk to them... we are just excited to get the product.. in my case at least it is the last piece I need to be able to run my gun.. lol No, people don't have them. If you mean me, I don't qualify as human being that my heart is black and shrunken, and I was never issued emotions beyond sarcasm. I am so deeply involved in multiple aspects of the firearm industry that I don't count.
not just you.. but yet other people like you.. lol |
|
Quoted:
Below I have some pics of the soon to be released KX5. The set up below is a 12" barrel with a 13.5 NSR It sticks out 1.75" past the rail. There is still some barrel past the receiver so total length is slightly16 shorter The KX5 length is 3 3/8" long. Based on these measurements I have figured: A 13.7" barrel + KX5 = 16.1" +/-. If you add a 15" NSR it will stick out 1.25" +/- A 14.5" barrel + KX5 = 16.9" +/-. If you add a 16.7 NSR it will stick out roughly 1" +/- ( I have this build coming so I will take some finished pics) Hope this helps. This should put a 10.5 barrel at 1/4" past a 13.5!! Thanks for the insight! |
| I'm just hoping for a stocking stuffer from the AR-Santa! As mentioned above, this would be the last part for me as well. I'm not even planning to shroud the muzzle device with a rail per se, but having the option would be nice. I would pin the KX5 to a 13.7" Rainier Ultra match. I choose a Geissele rail as they all use the same barrel but, but would need a KX5 to remove the rail vs. Pinning things in place with the KX3. I'm also running an SLR Rifle works DA7 adjustable gas block. The KX5 is the perfect solution for my build. |
|
Quoted:
I'm just hoping for a stocking stuffer from the AR-Santa! As mentioned above, this would be the last part for me as well. I'm not even planning to shroud the muzzle device with a rail per se, but having the option would be nice. I would pin the KX5 to a 13.7" Rainier Ultra match. I choose a Geissele rail as they all use the same barrel but, but would need a KX5 to remove the rail vs. Pinning things in place with the KX3. I'm also running an SLR Rifle works DA7 adjustable gas block. The KX5 is the perfect solution for my build. first couple weeks in January is the word.. the issue is understandable.. as stick pointed out they do not want to commit to a day and Magpul us.. I am hopeful they will hit before them as I was told that is certainly possible... but they just dont want to promise anything.. |
|
Thanks for the update. I get it, and its obviously more than just over promise / under perform issue. There is the whole
Web site / store front relaunch, and maintaining the brand post-John. Leads me to believe we'll see some other things by SHOT. Interesting to see when barrel availabilities improve for them too. Stick....will Rainier be getting any KX5 inventory, or is this something Noveske will be selling direct on their new website? |
|
Quoted:
Thanks for the update. I get it, and its obviously more than just over promise / under perform issue. There is the whole Web site / store front relaunch, and maintaining the brand post-John. Leads me to believe we'll see some other things by SHOT. Interesting to see when barrel availabilities improve for them too. Stick....will Rainier be getting any KX5 inventory, or is this something Noveske will be selling direct on their new website? according to noveske there will be "no issue" getting it through them directly or any of their distributors.. this makes me think they anticipate releasing ample stock.. |
Have an 8.2" 300 Blackout Noveske build waiting.
|
Quoted: Fair enough, I've only had my two for a few months, I'll bow out and let other people answer your questions. Quoted: Quoted: not just you.. but yet other people like you.. lol Fair enough, I've only had my two for a few months, I'll bow out and let other people answer your questions. Yea. I would never ask a long time industry insider, and long time personal friend of John Noveske himself, to answer any questions about a Noveske product. I'll just go with internet rumors. |
|
Quoted:
Below I have some pics of the soon to be released KX5. The set up below is a 12" barrel with a 13.5 NSR It sticks out 1.75" past the rail. There is still some barrel past the receiver so total length is slightly shorter The KX5 length is 3 3/8" long. Based on these measurements I have figured: A 13.7" barrel + KX5 = 16.1" +/-. If you add a 15" NSR it will stick out 1.25" +/- A 14.5" barrel + KX5 = 16.9" +/-. If you add a 16.7 NSR it will stick out roughly 1" +/- ( I have this build coming so I will take some finished pics) Hope this helps http://i40.tinypic.com/1zfh9g3.jpg http://i41.tinypic.com/dzujdi.jpg http://i43.tinypic.com/23ijotj.jpg http://i44.tinypic.com/k0o9zc.jpg holy good lord that looks nice. |
| Im in the same boat my gun is complete vltor mur, noveske gen 3 lower , vltor Emod stock kit, nsr 15, noveske 13.7" Infidel ..... all I need is a kx5 and my dream gun is complete. Every morning first thing I do is check availability on kx5. Lol glad Im not the only one I think. |
|
Quoted:
Im in the same boat my gun is complete vltor mur, noveske gen 3 lower , vltor Emod stock kit, nsr 15, noveske 13.7" Infidel ..... all I need is a kx5 and my dream gun is complete. Every morning first thing I do is check availability on kx5. Lol glad Im not the only one I think. You are not alone. |
|
Quoted:
Im in the same boat my gun is complete vltor mur, noveske gen 3 lower , vltor Emod stock kit, nsr 15, noveske 13.7" Infidel ..... all I need is a kx5 and my dream gun is complete. Every morning first thing I do is check availability on kx5. Lol glad Im not the only one I think. wait a minute, where did you get the gen 3 lower? |
|
Quoted:
wait a minute, where did you get the gen 3 lower? Quoted:
Quoted:
Im in the same boat my gun is complete vltor mur, noveske gen 3 lower , vltor Emod stock kit, nsr 15, noveske 13.7" Infidel ..... all I need is a kx5 and my dream gun is complete. Every morning first thing I do is check availability on kx5. Lol glad Im not the only one I think. wait a minute, where did you get the gen 3 lower? He didn't. I'm pretty sure he's confusing his gen 2 lower with a gen 3 Cus they look the same. |
|
Quoted:
Any input on a 16.7 NSR, 16in barrel, and KX5? I havent seen anyone go that route. Personally I wanted to avoid pinning :/ That's a heavy front end on a rifle. I think you'd be happier with the performance of a brake or a comp instead of the pig. It's not made for a 16' barrel. |
|
Quoted:
Has anyone ordered a KX5 from Noveske? I read on their FB page that they have them, but are waiting for packaging. The post said you could call and order, and your KX5 would be shipped in plain brown cardboard packaging. When was this posted on the FB page? |
|
Quoted: When was this posted on the FB page? Quoted: Quoted: Has anyone ordered a KX5 from Noveske? I read on their FB page that they have them, but are waiting for packaging. The post said you could call and order, and your KX5 would be shipped in plain brown cardboard packaging. When was this posted on the FB page? |
[ARCHIVED THREAD] - KX5 release when? (Page 1 of 2)
AR Sponsor