AR Sponsor
Posted: 7/3/2012 8:42:52 PM EDT
|
How hard should this be to unscrew? First I tried a screw driver between the slots, and bent them, then I found a 12 inch crescent wrench, and still won't budge.
Granted I am holding the upper and barrel assy in my hands, but I have never had this much trouble before. This is a factory barrel and flash suppressor from PSA... I would put in between something to hold it better, but am afraid the sight base will give before the flash suppressor does. And no, it's not pinned.... |
|
you need to be properly securing your BARREL in a vise when undoing a flash hider and attaching it.
Plenty of threads on here from guys who have done it improperly without a vise or using just a upper vise and snapping their barrel index pin or cracking the upper. get a couple blocks of wood and a rubber hose piece and do it right. |
AR Sponsor