AR Sponsor
Posted: 1/15/2011 5:46:39 PM EDT
|
toady at the local gun show I picked up one of the LE tactical entry stock, however it did not come with a carbine length tube, I do have a modified tube ( flat part with the stops is ground ) that I'm thinking of using, however
1. not sure if it is the proper length, , is it the same as carbine length ?? 2. the rear hole is also not threaded for the stock screw, what is the thread pitch on the regular AR buttstock screw so I can drill and tap it ? 3. do you still use a spacer lastly if my modified tube doesn't work are the entry stock tubes available by themselves ?? this : http://www.brownells.com/1/1/41133-ar-15-le-entry-tactical-stock-le-entry-stock-rock-river-arms.html |
|
You don't use the spacer with the Entry tube.*
Stock screw threads are 1/4x28. *ETA: If you find the Entry length a bit short, though, you can extend the stock 1" with a DPMS Buttstock Extender: 
When I did that I found the recessed hole on the buttpad necessitated getting some longer machine head screws: 
|
|
thanks for the replies
it not an ACE stock its this : http://www.brownells.com/1/1/41133-ar-15-le-entry-tactical-stock-le-entry-stock-rock-river-arms.html and the stock screw I was talking about is also called the butt cap screw, this is what I need the correct size |
AR Sponsor