AR Sponsor
Posted: 2/19/2009 9:56:22 AM EDT
|
I want to replace the factory safety on my RRA Entry Tactical with an ambi model (I have a joint problem with my right thumb and putting safety back on after firing requires too much time and some awkward movement). Any suggestions?
|
|
Probably the easiest to fnd, is the DPMS ambi unit; which you can get from a number of sources; including DPMS, Fulton, and Brownells. List is about $28, which is about the least expensive piece in an aftermarket which seems to pride itself on charging gross overprices on aftermarket pieces.
I've got two of them on a couple of rifles and they work just fine. The only small problem I had w/one of them was that the retaining lug on the right side piece was just a a bit too long and a hair too wide to let the right side thumbpiece go fully into the slot on the main body. Five minutes w/a small file fixed that problem. 
|
AR Sponsor