[ARCHIVED THREAD] - LPK install

Posted: 10/24/2008 2:51:35 PM EDT

Curious about the level of difficulty, how hard are these to install?
Thanks in advance!

Posted: 10/24/2008 2:56:24 PM EDT

[#1]

Plenty of info here to help and just take your time, hide the dremel tool, and you can do it. Read and study here a bit first and you will be surprised how easy it really is.

Posted: 10/24/2008 3:52:22 PM EDT

[#2]

if your careful and follow the directions that are in the "build it your self" section, it should take you no more than 25 min tops.

Posted: 10/24/2008 4:52:26 PM EDT

[#3]

Easy to very easy. Just take your time. Get a roll pin punch set, and read the tutorials. Watch the takedown pin detents!

Posted: 10/24/2008 5:30:52 PM EDT

[#4]

I installed my first one this summer in about 30 min with no problems. I bought the punch sets (standard and roll pin) and only used one standard punch (dont remember the size), but it was probably good to have them around.

Posted: 10/24/2008 6:49:04 PM EDT

[#5]

height=8

Quoted:
Watch the takedown pin detents!

Hold the front detent/spring down with a razor blade. Very simple, and that's probably the most difficult part!

Posted: 10/24/2008 7:40:41 PM EDT

[#6]

Go here assemble a lpk video
go to the assemble an ar15 lower video

Posted: 10/25/2008 12:05:12 AM EDT

[#7]

Quoted:
Easy to very easy. Just take your time. Get a roll pin punch set, and read the tutorials. Watch the takedown pin detents!

I always do the front pin in a ziploc bag, that way when I launch the pin the first dozen or so times I dont have to dig in the drawer for a new one.

[ARCHIVED THREAD] - LPK install

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - LPK install

[ARCHIVED THREAD] - LPK install