AR Sponsor
Posted: 7/22/2004 11:30:42 AM EDT
| Removed |
NO!!!!  the MRF-MX (the 10") one is something different. it is easy to tell them apart... just count the holes in the rail. MRF-C 8 holes MRF-M 12holes MRF-MX 13 holes the (as yet) un-named rifle length 17holes have a good one Stainless |
Shit, does this means I have to take the damn thing off to weigh it? Do not have any means of weighing the rail at my house, but I could not feel any noticable difference betweeen the MRF and FF RAS. If any thing the MRF felt a hair lighter. Troy's Official Designation: MRF-R, then the M16A4/M203 Guess that was a tough one to figure out. |
|
RRA Midlength Gas System. Had ADCO turn a RRA 18" SS 1-8 twist varmint barrel down for me. Have not done any Chrony work yet with this barrel, so I am not sure the velocities I can safely obtain, but I am hoping 2750 fps for 77 gr loads (+/- 25FPS) and 2825 for 69 gr loads (again +/- 25 FPS). Based off MV the 115 gr 6.8 SPC is getting from a 18" barrel , which has a midlength gas system as well, this should not be too far off the mark. |
|
Ordered directly from Troy (but I imagine the dealers here will have them in stock soon). You will want to talk with Cheryl 12 1/4" long. Really should have taken some measurement before I put it on the rifle. My bad...... Definitely heavier than the 12.0 DD, but certainly lighter than the ARMS #59. Best comparable weight would be to the Knights Rifle Length FF RAS and PRI. |
AR Sponsor