User Panel
Quoted: Free floated with barrel mounted bipod? View Quote I just want an RPK-like AR to put my Rare Breed trigger in and do some brrts with because reasons. ETA I might make a bipod mount that attaches to the rail since the VZ26 bipod I'm using is shorter than RPK bipods tend to be, so I maybe don't need to have it out at the muzzle to not interfere with folding up in front of the wood handguard. ETA2: Anyone know where I can get an inexpensive 18" free float rail? The ar15discounts.com NSB rail only goes to 15". |
|
Now I'm thinking I should just buy two of the NBS rails and basically use one to machine an extension for the other. So the first one 12", stops at the FSB. Then lop the barrel nut clamp off the other, machine FSB clearance, and join them together, possibly by machining the inside diameter of the first and the outside of the second, so that the second inserts into the first until an m-lok slot matches up, then join them with a key and a screw. Something like that.
Then I could run the fucker all the way out to the flash hider of the 22" barrel I have planned, get the bipod out near the muzzle, and remain free floated. While having enough top rail space to land F18s |
|
|
Quoted: Older pic but this is my S&W lower with a BCM CHF midlength with a Daniel Defense Lite 2 rail. https://i.imgur.com/jJRaiB1.jpg?1 Right now if I could only take one gun with me to where ever this would probably be it. View Quote Very nice "Franky." What scope is that? |
|
Quoted: Now I'm thinking I should just buy two of the NBS rails and basically use one to machine an extension for the other. So the first one 12", stops at the FSB. Then lop the barrel nut clamp off the other, machine FSB clearance, and join them together, possibly by machining the inside diameter of the first and the outside of the second, so that the second inserts into the first until an m-lok slot matches up, then join them with a key and a screw. Something like that. Then I could run the fucker all the way out to the flash hider of the 22" barrel I have planned, get the bipod out near the muzzle, and remain free floated. While having enough top rail space to land F18s View Quote |
|
Quoted: a friend of mine is looking for a handguard that will extend past his fsb. its a 16" mid length psa upper. i doubt he will care if its free float but he doesnt want to break the bank. he saw the utg pro/leepers ones but cant find it in stock. any other suggestions? View Quote |
|
|
View Quote Nice... Space Force standard issue. Dig the colors. |
|
https://i.ibb.co/x16zXb4/PXL-20210528-024153677-2.jpg
https://i.ibb.co/sRbFkT5/PXL-20210528-024207577-3.jpg Picked up one of those Centurion C4 mlok rails to help update an old LMT defender 2000 I had. Optic is a romeo 7s - don't see much out there on this but it looks like they just started shipping in the last month. Very pleased with the handguard. |
|
Quoted: https://i.ibb.co/x16zXb4/PXL-20210528-024153677-2.jpg https://i.ibb.co/sRbFkT5/PXL-20210528-024207577-3.jpg Picked up one of those Centurion C4 mlok rails to help update an old LMT defender 2000 I had. Optic is a romeo 7s - don't see much out there on this but it looks like they just started shipping in the last month. Very pleased with the handguard. View Quote Let me try to help you with the pics... That rail will serve you well. The thing is fucking bomb-proof. Extra props to you for modding your Streamlight tape switch to mount directly to the M-lok slot. The devil is in the details, my friend. Well done! |
|
Quoted: Let me try to help you with the pics... https://i.ibb.co/x16zXb4/PXL-20210528-024153677-2.jpg https://i.ibb.co/sRbFkT5/PXL-20210528-024207577-3.jpg That rail will serve you well. The thing is fucking bomb-proof. Extra props to you for modding your Streamlight tape switch to mount directly to the M-lok slot. The devil is in the details, my friend. Well done! View Quote Thank you! I was worried when I had started screwing in the mlok bits to the tape switch since they're slightly oversized but it ended up being a non-issue. |
|
Quoted: Let me try to help you with the pics... https://i.ibb.co/x16zXb4/PXL-20210528-024153677-2.jpg https://i.ibb.co/sRbFkT5/PXL-20210528-024207577-3.jpg That rail will serve you well. The thing is fucking bomb-proof. Extra props to you for modding your Streamlight tape switch to mount directly to the M-lok slot. The devil is in the details, my friend. Well done! View Quote Damn I wish C4s weren't so pricey. |
|
Quoted: https://www.ar15.com/media/mediaFiles/668/5819162711_1526735484_b-1736723.jpg 14.5" barrel floated under a DD OmegaX rail. View Quote Nice! Good choice with the PWS FSC556. In my opinion, there is no better straight muzzle device that offers the benefits of a high quality brake, while also providing substantial flash suppression. |
|
Quoted: https://i.imgur.com/Cy1Xcj9.jpg https://i.imgur.com/bvbMDdO.jpg Noveske/Mega/BA/BCM/Aimpoint build. View Quote This is so fucking nice... |
|
Need more pics, my peeps. Post 'em up!
It's been a while since I dubbed anyone a Knight of the FSB. Who will be next? Hmmm... |
|
Quoted: @Kuraki ... What's the status on this monstrosity? Talk is cheap... Time to bring in the noise, bring in the funk! You know... For Science, and stuff. https://i.imgur.com/fY3XMuy.jpg View Quote |
|
Good Lord... This is actually happening. Is your first name Boris, per chance?
Looks good so far. Looking forward to the finished product in all it's leviathan-like glory. |
|
Anyone got any leads on a free float rail with FSP cutout for a carbine length gas system? I just picked up a 14.5 Colt SOCOM barrel and am looking to do a build I can practice irons on..
|
|
|
|
|
Quoted: The latest state of my MK18ish gun. Just waiting for a proper aimpoint mount. https://www.ar15.com/media/mediaFiles/106019/D6241F54-AC0F-422F-8F00-D12153C80B8E_jpe-1969037.JPG View Quote That RIS II though! |
|
Quoted: Well, I finally found a place to get a Fortis mid gas cutout rail (discontinued for a few years) so it looks like cloning my first "real" AR is back in business. Minus some of the goofy shit I did because I didn't know any better. Now if only I could find a Rainier XTC muzzle device. (it was a factory Rainier Arms combat series) http://fc09.deviantart.net/fs71/i/2014/005/8/5/rainier_arms_combat_series_by_aknorthpolar-d7100hn.jpg http://fc05.deviantart.net/fs70/i/2013/330/7/b/boomstick__by_aknorthpolar-d6vom1c.jpg View Quote Sweet baby Jesus... There's a Surefire Helmet Light on your rifle! FYI that I've broken like six of those just trying to reattach them to my head. Please tell me this only temporary. Otherwise, everything else I'm seeing is good to go. Welcome to the party! |
|
Quoted: Sweet baby Jesus... There's a Surefire Helmet Light on your rifle! FYI that I've broken like six of those just trying to reattach them to my head. Please tell me this only temporary. Otherwise, everything else I'm seeing is good to go. Welcome to the party! View Quote That is a very old photo and it was the only light I had at the time Once I get the parts to finish a new build of that rifle (sold it years ago) it'll be a whole lot less fucktarded for sure. |
|
Looking for two-three handguards with FSB cutouts or some to be modified for one. I’m looking at a 15” Geissele with a PRI flip up rifle gas. Should that work? And an Apex gator grip Handguard. The 12.25” with a midlength cutout.
|
|
Quoted: Looking for two-three handguards with FSB cutouts or some to be modified for one. I'm looking at a 15" Geissele with a PRI flip up rifle gas. Should that work? And an Apex gator grip Handguard. The 12.25" with a midlength cutout. View Quote |
|
Like
|
|
|
Quoted: My kind of progressiveness. https://www.ar15.com/media/mediaFiles/125898/20210613_235558-1977987.jpg Lol dog decided to come see wtf I'm doing. Apparently I bore him. https://www.ar15.com/media/mediaFiles/125898/20210613_235719-1977988.jpg View Quote Fantastic! I'm in the middle of building a "bump saw" and was thinking of something like this. Nice! |
|
Quoted: My kind of progressiveness. https://www.ar15.com/media/mediaFiles/125898/20210613_235558-1977987.jpg Lol dog decided to come see wtf I'm doing. Apparently I bore him. https://www.ar15.com/media/mediaFiles/125898/20210613_235719-1977988.jpg View Quote That turned out killer. |
|
Quoted: My kind of progressiveness. https://www.ar15.com/media/mediaFiles/125898/20210613_235558-1977987.jpg Lol dog decided to come see wtf I'm doing. Apparently I bore him. https://www.ar15.com/media/mediaFiles/125898/20210613_235719-1977988.jpg View Quote I'm still waiting on the interlocking rail fuckery. Otherwise, in the words of DV: "Impressive... Most impressive." Nice job. |
|
Quoted: My kind of progressiveness. https://www.ar15.com/media/mediaFiles/125898/20210613_235558-1977987.jpg Lol dog decided to come see wtf I'm doing. Apparently I bore him. https://www.ar15.com/media/mediaFiles/125898/20210613_235719-1977988.jpg View Quote That looks sick! You taking orders for stocks? |
|
|
Quoted: I'm still waiting on the interlocking rail fuckery. Otherwise, in the words of DV: "Impressive... Most impressive." Nice job. View Quote |
|
|
Quoted: PSA: these things don't work right when you leave the fsb pins on the magnet in your shop. Went to the range this am hoping to get a video and to test these schmieser mags. All I got now is pics. Butt plate made, foregrip secured. https://www.ar15.com/media/mediaFiles/125898/20210619_110002-1983812.jpg https://www.ar15.com/media/mediaFiles/125898/20210619_110015-1983813.jpg https://www.ar15.com/media/mediaFiles/125898/20210619_110134-1983814.jpg View Quote That's killer! I'm embarrassed to know this, but wooden skewers work in a pinch for testing purposes |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.