AR Sponsor
Posted: 4/6/2016 9:35:35 PM EDT
|
Got an Anderson lower w/CMMG LPK, works fine.. only issue is the selector squeaks and is kinda gritty. Anything I can do? Or live with it till the parts wear down from use and eventually it goes away? |
| I normally put a small amount of wax in the selector switch hole on all of my builds and have never had any problems with squeaks or grit, I have seen some factory selectors squeak, my issued one in the army was terrible, until I tore it down and took a needle file to it, there was a very small burr in it that caused it to squeak no matter how much I lubed it.. |
|
Lube with anything resembling a lubricant. Grease it. Oil it. You cannot really spoil it. The whole gun needs some kind of surface treatment. Drop it in a 55 gal. drum of Marvel Mystery Oil. Spray it inside and out with WD-40. It don't make any difference - they all work AND IT WON'T SQUEAK ANYMORE!
Jeez. |
It's good training too. Remember your finger is not your safety 
AR Sponsor