User Panel
Re painted the 15-22
DSC_2578 by jamiehstanley, on Flickr DSC_2579 by jamiehstanley, on Flickr DSC_2577 by jamiehstanley, on Flickr |
|
Quoted:
I don't think anyone knows about them really.. but that being said I don't shoulder it. I did drill a notch in the buffer tube today so the set screw sets solid now... fells alot more solid View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Put on the new blade <a href="https://flic.kr/p/tVjxWN" target="_blank">https://c1.staticflickr.com/9/8794/18325026502_b4f752d43c_b.jpg</a>IMG_20150531_093957_541 by jamiehstanley, on Flickr <a href="https://flic.kr/p/tTkerL" target="_blank">https://c4.staticflickr.com/8/7784/18302526386_832e0d2ecb_b.jpg</a>IMG_20150531_093939_054 by jamiehstanley, on Flickr Boy those sure make me nervous. Hard to see how ATF would be ok with that, but what do I know.... I don't think anyone knows about them really.. but that being said I don't shoulder it. I did drill a notch in the buffer tube today so the set screw sets solid now... fells alot more solid I thought about running one of those with a cheek saddle on my CQBR pistol, but due to my current location decided it was too risky. I just run the cheek saddle by itself to be on the side of caution. Technically it would be fully legal to run both, but you get the jist. |
|
I got the KAC trigger guard installed in that Daniel Defense lower just now.
It looks pretty nice against that KAC 2 stage I picked up for $70 |
|
|
The Mega Slide Lock CH came in the mail today so I mocked up the KAC E3 barrel and BCG with it and put it on a Daniel Defense lower with a KAC non-adjustable 2 stage trigger.
It has enough purchase on each side to comfortably run either LH or RH even when the upper receiver has been machined for a Forward Assist. My other E3 built rifle has a MUR without the F/A and the Raptor CH and it is just a bit easier to use LH. This CH will be employed on another E3 assembly I have coming from the EE which has a KAC SR-15 legacy upper and this barrel and BCG will be headed onto an Anderson slick-side upper and be shot on a Quentin Defense lower with a Geissele SD-C. The KAC URX 3.1 13.5" I have coming from the EE will be also installed on that Quentin/Geissele/Anderson/Mega/LMT mutt |
|
|
I installed a brand spanking new Colt SOCOM bbl with FSB on my FSP Block II, as well as a brand new Matech and pinned/welded the muzzle device.
Was WAY more work than it sounds like. |
|
Pinned and welded?
Sissy. ETA: was supposed to be assembling my 14.5 SOCOM upper too, but apparently security forces (they're pretty much infantry, you know) have the roads blocked at Andrews and I'm trapped in an area with no gate access. So I'm stuck for a while. Some 15-minute PHA this turned out to be..... |
|
I got some parts in from brownells.
I installed a LPK into the Quentin Defense lower that's about to receive some KAC parts I pulled the buffer tube out of my Daniel Defense lower and put some effort into smoothing out the buffer spring and tube via frog lube. I also installed the .625 gas block onto my DD pencil barrel and did a quick mock up on an upper for it. The coming week should have another KAC SR-15 E3 upper finished and another nearly done which lacks a handguard and brake. |
|
I took the bolt catch out of my Quentin to install a Seekins bolt catch. They thread their lowers for a setscrew so it's quite easy.
I did the final assembly of the KAC E3 upper with the Anderson slick side receiver, Mega Slide Lock CH, URX 3.1 13.5" and a YHM 1/2-28 7.62 brake. It only took one shim to time. I'm still having to wait on a BCM pistol grip for that lower but essentially the rifle is ready to shoot. |
|
Finally got around to removing the Sig Brace and Law Tactical folding stock mount on a PWS MK 107 and looking forward to selling em'.
|
|
|
I swapped out the upper receiver on my M&P Sport (got it in a partial trade earlier this year). I got some great deals on Aero Precision upper receivers for 2 builds I'm doing, so I figured I'd change out the Sport receiver as well. It just bugged me not having the FA and dust cover for some reason.
|
|
|
Started assembly of my Black Rain lower with the Critical Capabilities nitrided LPK.
The magazine catch is installed with a Seekins release button and the buffer tube, take down pin, appropriate detents and springs are in. |
|
Quoted: Installed my C4 and painted it. Potato pic- https://farm1.staticflickr.com/259/18714989522_2e07bfcb72_b.jpg View Quote Not today, but recent paint: |
|
Pulled the FCGs out of a couple of lowers and swapped them into different lowers.
|
|
Started another lightweight build yesterday with another 2A Balios Lite upper/lower (my 4th). Have all the parts and pieces to go boom but, lost interest and decided to clean up a bit and hit the reload bench for an hour instead.
|
|
|
Quoted:
FSB 10.x" with cutout rails are where its at! Not today, but recent paint: <a href="https://flic.kr/p/toq69r" target="_blank">https://c2.staticflickr.com/6/5328/17975295645_e5ab520580_c.jpg</a>2015-05-22_11-05-36 by azoutdoorsman, on Flickr View Quote View All Quotes View All Quotes Quoted:
Quoted:
Installed my C4 and painted it. Potato pic- https://farm1.staticflickr.com/259/18714989522_2e07bfcb72_b.jpg Not today, but recent paint: <a href="https://flic.kr/p/toq69r" target="_blank">https://c2.staticflickr.com/6/5328/17975295645_e5ab520580_c.jpg</a>2015-05-22_11-05-36 by azoutdoorsman, on Flickr Nice! |
|
Installed a used Armalite 2 stage trigger in my Daniel Defense lower.
My gosh it's a nice trigger for what I paid. |
|
|
I only have 3 Geisseles. 4 LMTs. 3 KACs. 1 CMC. 1 Armalite.
Someday I will have a cool gun I also got the gas tube installed onto that 20" Faxon gas block gunner barrel. I'm going to do a quick mock up of it and the URXIII Rifle length I have coming to see how much clearance there is for that flip front sight. I'll probably end up using a 14" handguard for that barrel. |
|
Mocked up my KAC URXIII rifle p/n: 30005 with a Faxon rifle length gas 20" barrel.
That rail would work quite nicely with that set up but it is bound for another E3 assembly that I'm hopeful to get soon whenever the post office finds the money order they lost. |
|
Built stripped 2A Balios Lite upper with Noveske 12" Noveske CHF barrel, 2A titanium barrel nut, Gemtech Suppressor Quickmount flash hider and Noveske RCA BCG.
|
|
Took out my FCG and cleaned it. There was old paint remains all up in my FCG pocket, gumming everything up.
|
|
I pulled a Daniel Defense barrel out of the receiver that is now off to cerakote.
|
|
I tested out my 1/9 twist, Windham Weaponry (Green Mountain) barrel, with some 75 grain Black Hills ammo. It grouped very well, no keyholes, nice and tight. The American Eagle XM193 grouped half as well but still nice. It was insightful to see the somewhat different points of impact as well. It was nice to see a 1/9 barrel could shoot 55 to 75 grain ammo just as tight as a 1/7 twist can.
|
|
Took down a Noveske 300BLK upper with a NSR-13 and mocked it up with a KAC URXII 7 3/16 PN: 25124-3
The barrel is destined to be cut back to 8" since it has a pistol gas port. I will also have to SBR the lower it rides on eventually since it is a gen1 Noveske with a KAC trigger guard. |
|
Pinned 2 gas tubes in Noveske gas blocks and pinned them to 2 Noveske barrels.
|
|
I installed a side mount front swivel as a temporary solution and also an A2 grip that I ground off the finger groove protrusion to better fit my hand. tom.
|
|
Swapped the birdcage for a retro pronged break and upgraded to a moe+ grip... Then shot the shit out of it.
|
|
|
Swapped some rails around on uppers and installed a gas tube in one of the gas blocks I picked up last week at the gun show.
|
|
Got a 18" stainless steel barrel from Integrity Arms attached to an upper from Anderson Arms using a no name free float rail and railed gas block on my first build.
|
|
Today...
I installed a LaRue Micro T2 on a 6920 I bought another 6920 with no furniture I scoured the house for the magpul furniture set I had in anticipation of the ordered; and then I stripped the allen screw on the magpul trigger guard, forgetting it's an allen rather than a push pin :/ |
|
Installed a freshly repaired Nightforce NXS 1-4x24mm scope on a pencil barreled Dissy upper. Took it to the range and zeroed it. It's a Spikes/AIM barrel so it's a nothing special chrome lined mid-gas job. It shot about 1.5" to 2" at 100yds, a little better at 200 yds (3.0"), minute of head shot at the 300 yard steel gong. Last but not least our range in Nampa is equipped with a square steel plate at 550 yds. It's fairly large...say 20" x 20"? and hit it 19 for 20 using Nightforces FC-3G reticle.
When I arrived back home I removed the A1 flash hider and replaced it with a spare AAC M4-2000 Q/D 3-prong and figured I'd re-zero it next range trip. Well, you asked! |
|
Quoted:
Last night my 20" Stealth barrel showed up. I put it together right away: http://i739.photobucket.com/albums/xx39/jaqufrost/Larue%2020in%20Barrel_zpsdxwfcuds.jpg As it sits: Larue Stealth 20" barrel. YHM rail YHM flip up gas block KAC Micro rear sight A2 flash hider MIAD grip Larue MBT-2S trigger Larue BCG VLTOR A1 length fixed stock Harris bipod in Larue mount BCM Gunfighter medium latch with RTV mod BAD lever Bobro 34mm mount Bushnell Elite Tactical XRS 4.5-30x50 with Horus H59 reticle View Quote Did you set the gas block flush with the barrel step? I'm thinking that was the issue with the whole Nuttnfancy vs LaRue funfest a few months back. Something regarding the LaRue barrels not being profiled for handguards? Might be worth double checking. |
|
Quoted:
Last night my 20" Stealth barrel showed up. I put it together right away: http://i739.photobucket.com/albums/xx39/jaqufrost/Larue%2020in%20Barrel_zpsdxwfcuds.jpg As it sits: Larue Stealth 20" barrel. YHM rail YHM flip up gas block KAC Micro rear sight A2 flash hider MIAD grip Larue MBT-2S trigger Larue BCG VLTOR A1 length fixed stock Harris bipod in Larue mount BCM Gunfighter medium latch with RTV mod BAD lever Bobro 34mm mount Bushnell Elite Tactical XRS 4.5-30x50 with Horus H59 reticle View Quote Damn, there's alot of really long stuff on that gun lol Must be the new bump-saw. Naw looks good dude, how much was the glass? |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.