AR Sponsor
Posted: 1/18/2015 11:07:50 AM EDT
|
I feel those little "C" clips are going to fall off of my pins with the resultant loss of a pin at a critical moment. Is there a fix besides the "C" clips?
Thanks Bob |
| I bought a cheap pair of anti-walk pins from Amazon for my son's rifle (he has a Timney drop-in modular trigger that likes to walk pins). The pins aren't super tight, and have some side-to-side play, but they are a workable fix for $11 shipped. LINK . For a traditional FCG (i.e. non-modular), I would recommend spending the extra on KNS pins (what I have on all my rifles with JP triggers in them). |
|
Quoted: I feel those little "C" clips are going to fall off of my pins with the resultant loss of a pin at a critical moment. Is there a fix besides the "C" clips? Thanks Bob You must have an older CMC trigger. The newer models utilize a retention screw that keeps the pins from walking. Either see if you can get these newer retention screws/pins from CMC...or go the KNS route. Heck, the ones in the above post look like the CMC pins/screws. Why not just give them a go? |
AR Sponsor