AR Sponsor
Official MINI RECCE Photo and Discussion Thread (Page 1 of 219)
Posted: 10/27/2014 1:42:57 AM EDT
[Last Edit: Alaska511][Edited]
|
We aren't allowed in the RECCE / SPR threads, so post the 14.5s and smaller here!
I borrowed the name from another member 
RIFLES/SBRs ONLY, PLEASE. No Pistols or "PDWs" with braces, etc. You pistol peeps have an entire subforum for that stuff. 14.5" and shorter, free floated, variable mag optic - LPVOs are great! Please no magnifiers, or ACOGs.. 
Noveske Crusader upper WMD NiB BCG Vortex Razor HDII 1-6x Seekins forged lower Seekins billet lower parts Geiselle SSAe VLTOR IMod and RE Sprinco Blue and H2 BCM Mod1 grip |
I think this fits right in here: 12.5" ARP 6.8 barrel. 6.8 ARP super bolt and NIB carrier YHM 6.8 marked upper 10" Centurion rail LWRC UCIW stock kit with UC2 buffer and flat wire spring MOE+ grip Geissele S2S trigger Surefire Scout light in Larue QD mount Larue SPR mount Burris 1.5-6 MTAC |
|
Originally Posted By AR-Ryan21:
Placeholder. I need to take some pics for what may become my new favorite picture thread. Well hurry the hell up. I think I am going to transplant my Accupoint on to my 11.5 Spikes CHF LW. This has been a damn accurate barrel up to the 100 yards I have only shot to with it. |
|
Originally Posted By Alaska511: Hush.  Originally Posted By Alaska511: Originally Posted By MattNificent: 14.5 can be in the Recce thread, one of the few pics of an actual one has a 14.5 m4 barrel... Hush.  This thread is right up my alley. Here she is again  |
OEF 10-11
|
Originally Posted By plante74:
Thank you, PRI Rifle length carbon fiber tube. Larue Lt-104 mount Vortex viper PST 1-4x24 Originally Posted By plante74:
Originally Posted By HeyCoach:
Hey plante74, great build. Would you mind describing the handguard, scope, and scope mount? PRI Rifle length carbon fiber tube. Larue Lt-104 mount Vortex viper PST 1-4x24 What did you use to paint your rifle... Stencil? |
|
Originally Posted By bzugger: What did you use to paint your rifle... Stencil? Originally Posted By bzugger: Originally Posted By plante74: Originally Posted By HeyCoach: Hey plante74, great build. Would you mind describing the handguard, scope, and scope mount? PRI Rifle length carbon fiber tube. Larue Lt-104 mount Vortex viper PST 1-4x24 What did you use to paint your rifle... Stencil? |
OEF 10-11
|
Originally Posted By plante74:
It's just a mesh bag that I cut up. Originally Posted By plante74:
Originally Posted By bzugger:
Originally Posted By plante74:
Originally Posted By HeyCoach:
Hey plante74, great build. Would you mind describing the handguard, scope, and scope mount? PRI Rifle length carbon fiber tube. Larue Lt-104 mount Vortex viper PST 1-4x24 What did you use to paint your rifle... Stencil? Plante74 your shooter has been lusted over a lot in the last two days. I have nearly worked up the courage to can mine. I have posted her many times before but i think she belongs here. 
|
|
Originally Posted By WideFlange: Plante74 your shooter has been lusted over a lot in the last two days. I have nearly worked up the courage to can mine. I have posted her many times before but i think she belongs here. http://i1288.photobucket.com/albums/b499/WideFlange1/imagejpg3_zps6dcc2559.jpg Originally Posted By WideFlange: Originally Posted By plante74: Originally Posted By bzugger: Originally Posted By plante74: Originally Posted By HeyCoach: Hey plante74, great build. Would you mind describing the handguard, scope, and scope mount? PRI Rifle length carbon fiber tube. Larue Lt-104 mount Vortex viper PST 1-4x24 What did you use to paint your rifle... Stencil? Plante74 your shooter has been lusted over a lot in the last two days. I have nearly worked up the courage to can mine. I have posted her many times before but i think she belongs here. http://i1288.photobucket.com/albums/b499/WideFlange1/imagejpg3_zps6dcc2559.jpg |
OEF 10-11
|
My 12.5" SBR in a "Recce" configuration
-Centurion Arms barrel -NSR rail -Geissele SD-C trigger -Variable-power optic in QD mount (I also use an H-1) This is one of the most accurate guns I own (3/4 MOA after 4k rounds) and gets shot every time I go to the range. 
|
|
Originally Posted By jaqufrost:
I think this fits right in here: http://i739.photobucket.com/albums/xx39/jaqufrost/Mobile%20Uploads/2014-08/20140804_213017_zpsmiaymyr9.jpg 12.5" ARP 6.8 barrel. 6.8 ARP super bolt and NIB carrier YHM 6.8 marked upper 10" Centurion rail LWRC UCIW stock kit with UC2 buffer and flat wire spring MOE+ grip Geissele S2S trigger Surefire Scout light in Larue QD mount Larue SPR mount Burris 1.5-6 MTAC I'm thoroughly impressed. I love that stock... |
|
Originally Posted By Alaska511:
We aren't allowed in the RECCE / SPR threads, so post the 14.5s and smaller here! I borrowed the name from another member
http://i1107.photobucket.com/albums/h385/alaskaLTZ/DSC_7181_zps85d28b99.jpg http://i1107.photobucket.com/albums/h385/alaskaLTZ/DSC_7183_zps6d2ce9a5.jpg http://i1107.photobucket.com/albums/h385/alaskaLTZ/DSC_7185_zpsc29af98a.jpg http://i1107.photobucket.com/albums/h385/alaskaLTZ/DSC_7186_zps3dcec8a0.jpg Noveske Crusader upper WMD NiB BCG Vortex Razor HDII 1-6x Seekins forged lower Seekins billet lower parts Geiselle SSAe VLTOR IMod and RE Sprinco Blue and H2 BCM Mod1 grip Now that's what I'm talking about. What a handy FF scoped rifle. The "Mini-Recce" is everything the Recce should have been to begin with...
|
|
Originally Posted By jmreagan: I'm thoroughly impressed. I love that stock... Originally Posted By jmreagan: Originally Posted By jaqufrost: I think this fits right in here: http://i739.photobucket.com/albums/xx39/jaqufrost/Mobile%20Uploads/2014-08/20140804_213017_zpsmiaymyr9.jpg 12.5" ARP 6.8 barrel. 6.8 ARP super bolt and NIB carrier YHM 6.8 marked upper 10" Centurion rail LWRC UCIW stock kit with UC2 buffer and flat wire spring MOE+ grip Geissele S2S trigger Surefire Scout light in Larue QD mount Larue SPR mount Burris 1.5-6 MTAC I'm thoroughly impressed. I love that stock... |
Slackers! 
I got another one set up. This rifle has been one of my favorites, but has only been used with a EO and iron sights previously. Really diggin' the grip angle on that BCM with these shorter rifles, may change this one as well. 
-Complete Spikes CHF LW 11.5" upper w/ SAR3 lite quad -Rainer lower with Gieselle SSA -Trijicon Accupoint 1-4x 
With it's bigger brother: 
|
|
Originally Posted By lancecriminal86:
Wow, I've actually been remembered and paged!
Mine could use a Crusader barrel. With the SPR/M4 it's just too bulky to be a "light handy SBR", but it's certainly a fun rifle. A shorter can would make it much more handy! With the can she's the same length as a Mk12... A 12.5" with a Centurion 10 or 11 inch rail and something like the Ops Inc M4S or one of their short reflex cans would be PERFECT. DD 12.5" Gov barrel WAR adjustable receiver DD RIS II MK18 rail AAC SPR/M4 reflex can/MITER Brake Billet lower w/H2 buffer ALG ACT trigger [email=https://www.flickr.com/photos/100565977@N03/14704511803/]https://farm6.staticflickr.com/5562/14704511803_1061ab12cd_b.jpg[/email] [email=https://www.flickr.com/photos/100565977@N03/14684311212/]https://farm4.staticflickr.com/3890/14684311212_bcbf47521e_b.jpg[/email] [email=https://www.flickr.com/photos/100565977@N03/13573109374/]https://farm8.staticflickr.com/7272/13573109374_0564eba818_b.jpg[/email] [email=https://www.flickr.com/photos/100565977@N03/13572769543/]https://farm3.staticflickr.com/2882/13572769543_f7fe93ca90_b.jpg[/email] Originally Posted By lancecriminal86:
Originally Posted By RussellAthletic:
Paging lancecriminal with his 12.5" rig. Fits the bill perfectly... I won't steal his thunder by posting his pics. Wow, I've actually been remembered and paged!
Mine could use a Crusader barrel. With the SPR/M4 it's just too bulky to be a "light handy SBR", but it's certainly a fun rifle. A shorter can would make it much more handy! With the can she's the same length as a Mk12... A 12.5" with a Centurion 10 or 11 inch rail and something like the Ops Inc M4S or one of their short reflex cans would be PERFECT. DD 12.5" Gov barrel WAR adjustable receiver DD RIS II MK18 rail AAC SPR/M4 reflex can/MITER Brake Billet lower w/H2 buffer ALG ACT trigger [email=https://www.flickr.com/photos/100565977@N03/14704511803/]https://farm6.staticflickr.com/5562/14704511803_1061ab12cd_b.jpg[/email] [email=https://www.flickr.com/photos/100565977@N03/14684311212/]https://farm4.staticflickr.com/3890/14684311212_bcbf47521e_b.jpg[/email] [email=https://www.flickr.com/photos/100565977@N03/13573109374/]https://farm8.staticflickr.com/7272/13573109374_0564eba818_b.jpg[/email] [email=https://www.flickr.com/photos/100565977@N03/13572769543/]https://farm3.staticflickr.com/2882/13572769543_f7fe93ca90_b.jpg[/email] That's money son. Glad you heard the call! I've got a 12.5" BCM SOCOM that I'd love to chop and initiate this type of project. |
|
Originally Posted By RussellAthletic:
That's money son. Glad you heard the call! I've got a 12.5" BCM SOCOM that I'd love to chop and initiate this type of project. Originally Posted By RussellAthletic:
Originally Posted By lancecriminal86:
Originally Posted By RussellAthletic:
Paging lancecriminal with his 12.5" rig. Fits the bill perfectly... I won't steal his thunder by posting his pics. Wow, I've actually been remembered and paged!
Mine could use a Crusader barrel. With the SPR/M4 it's just too bulky to be a "light handy SBR", but it's certainly a fun rifle. A shorter can would make it much more handy! With the can she's the same length as a Mk12... A 12.5" with a Centurion 10 or 11 inch rail and something like the Ops Inc M4S or one of their short reflex cans would be PERFECT. DD 12.5" Gov barrel WAR adjustable receiver DD RIS II MK18 rail AAC SPR/M4 reflex can/MITER Brake Billet lower w/H2 buffer ALG ACT trigger [email=https://www.flickr.com/photos/100565977@N03/14704511803/]https://farm6.staticflickr.com/5562/14704511803_1061ab12cd_b.jpg[/email] [email=https://www.flickr.com/photos/100565977@N03/14684311212/]https://farm4.staticflickr.com/3890/14684311212_bcbf47521e_b.jpg[/email] [email=https://www.flickr.com/photos/100565977@N03/13573109374/]https://farm8.staticflickr.com/7272/13573109374_0564eba818_b.jpg[/email] [email=https://www.flickr.com/photos/100565977@N03/13572769543/]https://farm3.staticflickr.com/2882/13572769543_f7fe93ca90_b.jpg[/email] That's money son. Glad you heard the call! I've got a 12.5" BCM SOCOM that I'd love to chop and initiate this type of project. A 12.5" built up like a Mk12 Mod Holland, ie Ops Inc reflex can and 12" PRI handguard would be AMAZING. I'd try it if I didn't have a QD latch on the SPR/M4... |
|
Originally Posted By lancecriminal86: A 12.5" built up like a Mk12 Mod Holland, ie Ops Inc reflex can and 12" PRI handguard would be AMAZING. I'd try it if I didn't have a QD latch on the SPR/M4... Originally Posted By lancecriminal86: Originally Posted By RussellAthletic: Originally Posted By lancecriminal86: Originally Posted By RussellAthletic: Paging lancecriminal with his 12.5" rig. Fits the bill perfectly... I won't steal his thunder by posting his pics. Wow, I've actually been remembered and paged!Mine could use a Crusader barrel. With the SPR/M4 it's just too bulky to be a "light handy SBR", but it's certainly a fun rifle. A shorter can would make it much more handy! With the can she's the same length as a Mk12... A 12.5" with a Centurion 10 or 11 inch rail and something like the Ops Inc M4S or one of their short reflex cans would be PERFECT. DD 12.5" Gov barrel WAR adjustable receiver DD RIS II MK18 rail AAC SPR/M4 reflex can/MITER Brake Billet lower w/H2 buffer ALG ACT trigger [email=https://www.flickr.com/photos/100565977@N03/14704511803/]https://farm6.staticflickr.com/5562/14704511803_1061ab12cd_b.jpg[/email] [email=https://www.flickr.com/photos/100565977@N03/14684311212/]https://farm4.staticflickr.com/3890/14684311212_bcbf47521e_b.jpg[/email] [email=https://www.flickr.com/photos/100565977@N03/13573109374/]https://farm8.staticflickr.com/7272/13573109374_0564eba818_b.jpg[/email] [email=https://www.flickr.com/photos/100565977@N03/13572769543/]https://farm3.staticflickr.com/2882/13572769543_f7fe93ca90_b.jpg[/email] That's money son. Glad you heard the call! I've got a 12.5" BCM SOCOM that I'd love to chop and initiate this type of project. A 12.5" built up like a Mk12 Mod Holland, ie Ops Inc reflex can and 12" PRI handguard would be AMAZING. I'd try it if I didn't have a QD latch on the SPR/M4... Nm |
OEF 10-11
|
Originally Posted By 1iviper:
some nice "mini's" in here
http://img.photobucket.com/albums/v619/1iviper/IMG_1941_zps2b29f82d.jpg http://img.photobucket.com/albums/v619/1iviper/IMG_1946_zps378336d7.jpg Yep. That'll do!  
|
"They are not men, they are weapons."
It's not me, it's the BRD talking.
It's not me, it's the BRD talking.
|
Originally Posted By Alaska511:
Looks great! I have avoided .300 because of our availability here. I really want one! Yeah, I don't shoot it as much as I want when the "cheap" ammo is $1 a round. Can't wait to get the rest of my reloading stuff to take full advantage.. |
|
Originally Posted By 1iviper:
some nice "mini's" in here
http://img.photobucket.com/albums/v619/1iviper/IMG_1941_zps2b29f82d.jpg http://img.photobucket.com/albums/v619/1iviper/IMG_1946_zps378336d7.jpg Well done sir! What is the barrel length? |
|
[Jump To Reply]Originally Posted By 1iviper:
some nice "mini's" in here http://img.photobucket.com/albums/v619/1iviper/IMG_1941_zps2b29f82d.jpg http://img.photobucket.com/albums/v619/1iviper/IMG_1946_zps378336d7.jpg Yep. That'll do!
[Jump To Reply]Originally Posted By 1iviper:
some nice "mini's" in here http://img.photobucket.com/albums/v619/1iviper/IMG_1941_zps2b29f82d.jpg http://img.photobucket.com/albums/v619/1iviper/IMG_1946_zps378336d7.jpg Well done sir! What is the barrel length? thanks , 11.5" |
Official MINI RECCE Photo and Discussion Thread (Page 1 of 219)
AR Sponsor