AR Sponsor
Posted: 5/1/2014 5:37:25 PM EDT
|
I have a DPMS with a heavy bbl. I am in the process of replacing some parts and have run into a problem. I have removed the flash suppressor, but the crush washer will not go back over the threads. I think I am going to have to cut it off.
I have a couple of questions. First, can I pick up another crush washer at a hardware store or auto parts store? Second, what size will I need (width and thickness)? Thanks! |
|
Quoted:
I have a DPMS with a heavy bbl. I am in the process of replacing some parts and have run into a problem. I have removed the flash suppressor, but the crush washer will not go back over the threads. I think I am going to have to cut it off. It should "un-thread" with a little encouragement. It's also considered a one-time use item, since it deforms to suit the amount of torque applied to time the FH, so don't re-use it. Order on-line, or see your local AR dealer. I have a couple of questions. First, can I pick up another crush washer at a hardware store or auto parts store? Second, what size will I need (width and thickness)?
Thanks! No. They're AR-specific parts. |
AR Sponsor