AR Sponsor
Posted: 1/22/2014 1:32:50 PM EDT
|
|
| You can get a new stripped upper fairly cheap, and use the ejection port assembly, as well as the forward assist assembly, from your current rifle just by taking them off. What you will need though are some proper tools to remove the roll pin from your current forward assist and mount the barrel/hand guard to the new upper receiver. |
|
Quoted: |
|
You need:
One of these Sorry, gave you the wrong link, you need one of these If you kept your upper on your lower when you tried to install the barrel, inspect your lower very carefully. Pay special attention to the the area around where the pins slide (both front and rear). |
|
Quoted: No pics its a m&p 15 sport no forward assist no dust cover Was curious about the tweaked areas you mentioned. You can get an upper with M4 feed ramps and you can even get one with the forward assist and dust cover if you want. Check Rainier, DSG, Spikes, primary Arms and just order a new upper and an armorers wrench. |
|
Quoted: OK thanks a lot guys,still my question is is there a certain type that fits my rifle or are they a universal kind of thing one fits all,I know its a flattop that's about it..sorry for my ignorance-- M4 flattop upper receiver Pick your favorite brand. Go to one of the many great site sponsors you see plastered all over this board
|
AR Sponsor