AR Sponsor
Posted: 10/7/2013 5:55:46 AM EDT
|
I bought my first AR back and February and decided I'd build my own in 6.8 SPC shortly after. After waiting 4 months for my Bison Armory barrel it finally came in last week. Took it to the range yesterday for break in and was run short because the range closes at 5 on Sundays but my last grouping was 0.75" using Hornaday V-Max. There's still some adjustments I'd like to do and think I can get a little improvement but there were zero malfunctions so I'm happy with that. The gun specs are:
Aero Precision Lower Aero Precision COP Mid-Length Upper 18" Bison Armory Stainless Mid-Length Barrel Gisselle SSA-E Trigger Magpul Alum Trigger Guard Magpul ACS Stock Magpul MOE Grip Tasco 6-24x50 Scope Harris Bipod BCM Mod 3 CH Kies NiB Carrier Stag 6.8 Bolt href=http://i1306.photobucket.com/albums/s561/bjwest15428/null_zpsfc36a846.jpg" /> href=http://i1306.photobucket.com/albums/s561/bjwest15428/null_zps439a9f29.jpg" /> href=http://i1306.photobucket.com/albums/s561/bjwest15428/null_zps3285a581.jpg" /> And for a little fun, I took a shot at this I found on the range href=http://i1306.photobucket.com/albums/s561/bjwest15428/null_zps2500cebd.jpg" /> |
| That was an old scope I used to have on an airsoft sniper rifle about 13ish years ago and the bipod came from same said gun. It's old but it works perfectly fine and has a great picture. And yes I said airsoft but at the time these were actual gun parts and not airsoft "gun parts". |
|
Quoted:
As long as the gas tube is not exposed its a non issue Quoted:
Quoted:
Personally I wouldn't have an exposed gas block but that's entirely your call. Other than that, nice rifle. As long as the gas tube is not exposed its a non issue ...for you. My pinky has a wicked burn scar from the only rifle I've ever shot with an exposed gas block due to some people having long monkey arms. Might be why I said "personally" though. |
|
Nice build!
I'm using the same upper/lower/trigger for a build right now. Big Brown Truck has my barrel "out for delivery" as we speak. I hope to join you in the AP COP Crew soon. 
Your pictures make it hard to see which rail sections you chose. Can you list which ones you used and why? Off Topic: Nice looking boat too. 
|
| Thanks for all the comments. I had Ben at bison pin the gas block so I'm good there and the rail sections I used is the bare one on the right side, left is bar with one sling attachment point, and the bottom section has about 4 inches of rail so I could mount the bipod and the rest bare. I used the bare ones so they wouldn't snag on anything and also I don't have any rail covers. |
|
Quoted:
Thanks for all the comments. I had Ben at bison pin the gas block so I'm good there and the rail sections I used is the bare one on the right side, left is bar with one sling attachment point, and the bottom section has about 4 inches of rail so I could mount the bipod and the rest bare. I used the bare ones so they wouldn't snag on anything and also I don't have any rail covers. Nice. No reason to add the weight of rail covers if you don't need to. |
AR Sponsor