AR Sponsor
Posted: 2/14/2009 6:58:56 AM EDT
|
I recently built a Del-ton kit using their 16" mid-length upper mated to a Double-star lower. Everything is working fine, except for the iron sites. The upper is a flat-top onto which I've installed the removable carry handle. The front site the standard A2 FSB (not sure if it's F or not). They problem is that to get the sight anywhere close to POI I'm having to lower the front site post down all the way into the FSB so that just a little nubbin sticks out. After getting frustrated at the range, I even got a laser boresight and it's showing the same thing. Windage is spot on with a couple clicks left; it's just the elevation that's giving me problems. I was wondering if any else had a similar problem with some possible solutions. Is there any way that the fact that it's a midlength kit mess with the sight alignment (I can't really see how). Thanks for your help!
|
|
Check out my pictures in this thread.
http://www.ar15.com/forums/topic.html?b=3&f=118&t=424705 It sounds like you have a commercial spec carry handle and need an USGI spec. Bravo Company USA sells the USGI version. |
AR Sponsor