AR Sponsor
Posted: 9/18/2008 8:06:16 PM EDT
| Noob here, I have a Superior Arms rifle fairly stock,only added an ACE stock to it....bought it used and had to replace the buffer detent. Now it seems every time I shoot it much the pin holding the trigger group in place works its way out. Am I doing something wrong here? My Bushy does not ever have this problem. Any thoughts? |
| It sounds like your hammer spring is on backwards or if on correctly, the leg is not engaging the groove on the trigger pin. The groove may be undersize or the spring leg oversize. The legs from the hammer spring should be coming out from the bottom not over the top of the coil. It will work either way, but there is not the correct angle or spring pressure to hold the trigger pin in if the legs are coming off of the top of the coil. |
AR Sponsor