AR Sponsor
Posted: 2/19/2008 1:24:07 PM EDT
|
i have a new rra upper on the way but no one has a rra stripped lower in stock. the word is several month wait.. besides stag what other lower will match a rra upper.. |
Get an Anvil Arms lower (they may still have stripped lowers on sale for $100). Fit and finish is excellent and they will laser etch any graphic on it that you want for free.  |
Anvil Arms upper and lower receivers are hard coat anodized to the Mil-Spec and then flat black Teflon coated to give a very smooth, dark, black finish that is even and consistent. This extra step is not mandatory but it makes for a much richer looking finish and is of course an extra expense to us. Right off the top of my head I know these uppers and lowers are a perfect match for: Bushmaster DPMS CMMG Dell-Tron I know there are a few others but I can not think of them at this moment. Rock River does not Teflon coat their receivers so they will not be a real close match to the Anvil receivers or any of those on the list above. If an exact color and finish match in important to you and your using a Rock River upper or lower you would be well advised to use Rock River for the other 1/2 as well. Otherwise you will be relatively close in that they are all black but the texture or the finish is different and the non-Teflon coated parts are never as consistent in color or texture as those with the Teflon coating are. I hope this is helpful. Jon Kruger President, Anvil Arms LLC Lakeland, FL. 863-398-4460 Proud ARFCOM Industry Partner Lifetime NRA Member Email: [email protected] www.AnvilArms.com |
|
$ 100 is a good price for a lower for that Anvil Arms, depending on shipping cost RRA has nice lowers, but nothing I would wait around for. A bunch of guys have Megas in stock, which are very nice, but a lower is a lower (mostly) and $ 100 is a good price. I have a grey lower and a jet black upper on my main carbine, you can't tell when you are shooting it 
|
|
This is a great lower for the price. I have one on my LMT upper and wouldn't change a thing. GTS Lower |
Actually yes they do. They have complete factory built lowers or 9mm marked stripped lowers. The stripped 9mm lowers are exactly the same as the 5.56 lowers except they are marked 9mm. Get one of those to complete your build now and later, when the 5.56mm lowers are available again, get one of those for your current build and use this lower for the 9mm build that you will eventually want anyway hoice BTW - Unless you get Telfon coated upper and lower receivers, color match and fit is a crap shoot at best even when both receiver come from the same company. Good luck |
|
check pete at legal transfers for rra lowers... legal tranfers |
AR Sponsor