[ARCHIVED THREAD] - Someone school me please.

Posted: 1/16/2008 7:46:10 AM EDT

Recently I purchased the PRI MSTN QC Brake for a build I am doing. Can I assume that the position shown in the photo is the proper position when mounted on my rifle only with a slight cant to the right for better viewing? Additionally is comes with multiple thin(very very thin) shim type washers, what is the deal with those if anyone knows? (I think I do but want to be surehad
Thanks in advance for any help,
Gary

http://global-tactical.com/ProductImages/products/prod_add/272-20050919075734.jpg

Posted: 1/16/2008 8:11:34 AM EDT

[#1]

Yes, the three little holes go up. The shims are so you can time it to position correctly as your threads may not be cut the same as the next guys. I believe this is your answer, but you might want to wait for a few others to answer first.

Posted: 1/16/2008 10:35:57 AM EDT

[#2]

Quoted:
Yes, the three little holes go up. The shims are so you can time it to position correctly as your threads may not be cut the same as the next guys. I believe this is your answer, but you might want to wait for a few others to answer first.

+1. The shims are for timing/"clocking" the brake.

Posted: 1/17/2008 8:02:31 AM EDT

[#3]

Just be apprised that your new brake will probably not make you much loved on the firing line, especially on roofed ranges...

But you probably already knew that. Enjoy.
Moon

[ARCHIVED THREAD] - Someone school me please.

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Someone school me please.

[ARCHIVED THREAD] - Someone school me please.