AR Sponsor
Posted: 12/3/2007 11:10:00 PM EDT
|
I just thought to share a build that I finished this week. It was meant to fulfill certain requirements: 1) Avoid a front heavy feel. My POF is front heavy, and while it functions great, I prefer more of a weight neutral sense of balance. 2) Utilize a SOCOM profile barrel. My LWRC is weight neutral, but I do not like how they use a govt. profile barrel. I had some accuracy issues with my LWRC, and someone suggested that maybe it is because of the barrel profile. 3) Allow me to switch out barrels without sending my upper back to a factory/manufacturer. Both LWRC and POF utilize proprietary gas blocks. I thought it would be nice to have the option to reconfigure your AR platform without the requisite 3-6 months wait. 4) Utilize a low profile handguard with proper clearance for the gas piston. I prefer to have a handguard that does not raise my optics. I know that the ARES will fit under an ARMS 50 and a Vltor CASV (with some modification). It turns out that my LWRC handguard works with a standard barrel nut. In addition it properly clears the ARES gas piston without any modifications. Interestingly, my LWRC gas block touches the LWRC handguard. The ARES gas piston does not. (+1) Note: LWRC sells their ARM-R handguards for ~ $300 I think. I decided to use a Daniel Defense clamp style gas block. I have seen a ARES conversion kit utilized with a PRI Flip Up gas block/front sight (clamp style). It was run on full auto over 3000 rounds without the gas block slipping. I am curious to see if the DD gas block also holds up well. Installation was a breeze. Tighten up & align the barrel nut. Then insert the spring and op rod into the upper receiver. Next, slide the gas block with the spigot AND gas piston onto the barrel. Slide the gas piston over the op rod and push the gas block to its final position. Tighten the gas block clamp screws and you are all set. Please feel free to opine as you see fit. Just thought to share. Regards.    |
|
bb, Thank you for this. Is the ARES system pictured on your LWRC rifle? What make of handguards are shown in the pic? I'm assuming LWRC, but I could be wrong. Also, any idea what other types of railed handguards would be compatible with the ARES Gas Piston without modification? Bud |
AR Sponsor