AR Sponsor
Posted: 3/29/2007 5:07:26 PM EDT
| With my geissele DMR trigger, there are 3 pins, 2 have two grooves, and one has two, plus a smaller third groove. Which ones go where? |
|
The 3 groove is slightly larger that the 2 groove and is for the hammer. Use it only if your receiver has a hammer pin hole that is worn or slighty oversized. To check take a 2 groove pin and try to push it into the hammer pin holes by hand (no hammer installed). If the 2 groove can be pushed in by hand use the 3 groove. The right fit is a slight interference fit where the pin must be tapped in by hand. |
AR Sponsor