Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
AR Sponsor
2/2/2007 6:38:25 PM EDT
Is there a problem reloading your own ammo for use in AR's, I have heard it is not recommended.
Jerry
2/2/2007 6:42:09 PM EDT
[#1]

Quoted:
Is there a problem reloading your own ammo for use in AR's, I have heard it is not recommended.
Jerry


I've done it thousands of times.
2/2/2007 7:16:13 PM EDT
[#2]
I am rockin and rollin on some handloads. It took me a couple of recipes but now i have got it and havent had a hiccup in 2000 rounds. My loads are smokin at 3315fps. (55grfmjs)
2/2/2007 7:17:28 PM EDT
[#3]
I hope not since I cranked out 3800 rds last December

Here's 1800 of them

2/2/2007 7:24:41 PM EDT
[#4]
I've filled 4 fifty caliber ammo cans with my .223 reloads.  All are very close to M193 specs and they work fine in all my AR's.
2/2/2007 7:40:01 PM EDT
[#5]

OMG........I hope not
2/2/2007 8:54:18 PM EDT
[#6]
I know this isn't the reloading forum but has anyone had good success with IMR 4895, 4064 or Varget with 55 grain bullets?  These 3 powders worked fine with my MINI 14. Is there a better powder i should use for an AR?
2/3/2007 2:59:30 AM EDT
[#7]
Ball..........I.E H335,BL-C2,748,
2/3/2007 4:19:27 AM EDT
[#8]
I really really need to get set up for reloading!
2/3/2007 5:03:47 AM EDT
[#9]
You can buil a vert  low cost 223 reloading se-up buy all lee stuff press dies etc and you will be putting them together on a budget. The componets are going up in price so buy large amounts of  powder,primers, bullets when you can......
2/3/2007 5:31:43 AM EDT
[#10]
Awesome!  I am going to break down and buy a press this year.  What can I expect it to cost per round when reloading .223 using my own brass?  How about .45, .38 & .357?  
2/3/2007 5:40:30 AM EDT
[#11]
The only problem I have is that I can't seem to reload enough.
2/3/2007 6:24:35 AM EDT
[#12]
I have used AA2230 and IMR4064 with good results. Current batch is loaded with AA2230 and 55gr Hornady, and IMR4064 with 55gr V-Max.
2/3/2007 6:53:29 AM EDT
[#13]
Do you guys crimp your rounds?
2/3/2007 6:58:18 AM EDT
[#14]

Quoted:
Do you guys crimp your rounds?


I use a Lee Factory Crimp and I swear it has improved accuracy. I know I am going to catch hell over that statement but it works for me.
2/3/2007 7:07:31 AM EDT
[#15]

Quoted:
Do you guys crimp your rounds?


Pistol rounds yes. AR Rounds no.
2/3/2007 7:09:19 AM EDT
[#16]
HOW MUCH CAN I SAVE RELODING?
2/3/2007 7:15:01 AM EDT
[#17]

Quoted:
Is there a problem reloading your own ammo for use in AR's, I have heard it is not recommended.
Jerry


Hey brother

Reloading is the new way to horde ammo.
2/3/2007 7:30:22 AM EDT
[#18]
You can get an eight lb. jug of BLC-2 for about $120 that will load a little over 2000 rounds. 1000 fmjs cost about $50. 1000 primers cost about $20. So if you already have brass saved you can load a thousand rounds of realy nice ammo for around 13 cents a round. If you need brass it will cost you another $30-$50 per 1000 but you will still be saving money. Georgia Arms wants $230 for thier reloads so you would be saving about $100 bucks compared to buying reloads and even more compared to buying factory ammo.
2/3/2007 7:33:24 AM EDT
[#19]

Quoted:
HOW MUCH CAN I SAVE RELODING?


Depends on the caliber and components used.  For instance using pulled 55 grain projectiles, 21grains reloader 7 and Winchester primers bought in bulk by 5,000, i can load 100 223's for around $9.60 or $96.00 for 1,000. Add 1.50 per hundred with 26-27 grains of another powder. What's factory brass cased 223 going for right now? $275-300.00 1,000? You'll save lots of money, learn something useful and have fun in the process.
2/3/2007 10:49:38 AM EDT
[#20]

Quoted:
HOW MUCH CAN I SAVE RELODING?


It cost me about $00.16 per round for .223, and about 1.50 per box of #50 for 45acp
Thats also because I cast....
2/3/2007 12:16:30 PM EDT
[#21]

Quoted:
HOW MUCH CAN I SAVE RELODING?




I reload for several calibers.  Just having the flexibility to load for 45ACP or 300 Weatherby makes handloading a no brainer.  And I don't have to leave the house to commune with the Fudds at Sportsman's Warehouse.

If I had to buy 300 Weatherby ammo I'd be living under a bridge.

You won't save a dime.  Once you buy gear, you take the money you were spending on factory ammo and load up four times more ammo.

In some calibers you can save money.

My example is, if a 20 round box of 300 WBY ammo cost $50 retail.  I can load about 150 rounds for the same cost (on average ) and the cost goes down even further as I reuse the brass.  I bought the bullets in bulk by the thousand.  I got the spendy Weatherby brass, but it's better made and should last 10? loadings.

The cost savings for reloading 45ACP is even higher.  I don't know exactly, but I don't wish to contemplate what 3000 rounds of blasting ammo for a 45 costs.

Cost savings? debatable.  But you get more bang for your ammo dollar if you handload.



ZM
2/3/2007 12:17:50 PM EDT
[#22]
.
2/3/2007 12:32:03 PM EDT
[#23]
wow you really do save in ways. Next thing I need is to get a press that I can load 9mm, .40 and .223. any suggestions?
2/3/2007 1:05:24 PM EDT
[#24]
Dillons, Like these. Great stuff! A Dillon 550B would suit your needs just fine. 380$ for the press, powder measure ect. You would still need some more items but this is a dandy press.
There is a 650 in the pic also. I use it to load 45 ACP.

2/4/2007 9:35:11 AM EDT
[#25]
Thanks for the info, I will start reloading ASAP.
Jerry
AR Sponsor