[ARCHIVED THREAD] - First Samco...

Posted: 4/29/2006 7:01:55 PM EDT

... any input on their rail systems??? (m44)

Posted: 4/29/2006 7:30:44 PM EDT

[#1]

Quoted:
... any input on their rail systems??? (m44)

I own both the M44 and M33 and I like them, I reccomend them for the little money that you spend on them but
you will buy the machined ones soon enough.

Save a little more and just buy the quality first.

Eventually you will have a bunch of parts lying around like me because you buy cheap first.

Posted: 4/29/2006 7:40:51 PM EDT

[#2]

don't waste your money, if you want to spend as little as possible then get a YHM forearm or a used one in the EE.

Posted: 4/29/2006 8:12:58 PM EDT

[#3]

I have the M33 handguards and broke them with a verticle grip in certain situations that needed force applied to keep the weapon from hitting my face in target aquisition. Save your money, go with mil standard machined.

Posted: 4/29/2006 9:25:23 PM EDT

[#4]

The M33's came on my Fulton Armory upper. They are not good for optics As most 2 piece units are not. And they are made of plastic and are not all that durable.

Posted: 4/29/2006 10:18:20 PM EDT

[#5]

Save yourself some agony, and go with Midwest Industries! I went with a MI-17 for my AR, and I couldn't be happier with it! It mounts rock solid, even with a vertical foregrip, it does not budge!

www.midwestindustriesinc.com/ar_2_piece_forearm.htm

Posted: 4/30/2006 4:35:41 AM EDT

[#6]

I had the carbine set awhile back, and melted them on an M4 during a test. The company was nice enough to send me a new set at no charge. With that said, I wouldn't do it again.

Posted: 4/30/2006 4:58:53 AM EDT

[#7]

I've got a set of M44's on one of my Bushmasters. Havn't had any problems but they havn't seen abuse. Got a vert grip and G2 mounted. Better than stock if you want inexpensive rails. But certainly not as stong as aluminum. I got mine off the EE.

(thats not the G2)replaced it later on.

Posted: 4/30/2006 12:28:24 PM EDT

[#8]

My Tango Down would not fit on the M44 system. Other grips MIGHT. You'd probably be better off getting something more mil-spec. The only reason I use them is that the job paid for em.

Posted: 4/30/2006 1:04:44 PM EDT

[#9]

Quoted:
don't waste your money, if you want to spend as little as possible then get a YHM forearm or a used one in the EE.

+1
junk

Posted: 4/30/2006 6:05:15 PM EDT

[#10]

Not good. Not good at all.

Posted: 4/30/2006 6:36:22 PM EDT

[#11]

they work, but there are better systems out there

the cheapest ones i would use are the YHMs

[ARCHIVED THREAD] - First Samco...

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - First Samco...

[ARCHIVED THREAD] - First Samco...