AR Sponsor
Posted: 1/25/2006 12:57:58 PM EDT
|
So from doing a search and reading around a bit, I've figured that the Colt Milspec tubes are turned down from a larger piece and that the non-milspec (RRA, Bushmaster, etc.) are simply threaded, which makes them thicker, etc. Why did Colt do it this way and what's the advantage to having a thinner tube? I already picked up a milspec tube to use with my VLTOR stock and I'm generally sold on using a milspec tube because there are more stock options out there for them but it seems like Colt went through some unnecessary extra steps. Could someone help explain just what the advantages are and why Milspec tubes are the way they are? Thanks in advance, Mike |
|
In order to reach a precision specification, you have to do some sort of work... to rely on the extrusion of the day for the outside dims (what some companies do) will make you end up with tubes that vary as much as 0.010 from batch to batch (what some companies have). I explained the tube in some detail in this link -- Maybe I should but an AR guide on my web site... eta: they are not turned down, they can't be... |
AR Sponsor