[ARCHIVED THREAD] - Zeroing advice

Posted: 12/3/2005 9:55:32 PM EDT

Okay, I bought a 20" Bushy A3 about a year ago. I put a scope on it for awhile, and it worked great. I now put the carry handle back on and it still has the factory zero. The windage is right on but it is about 6" high at 50 yards. I know the military zeros at 25 yards, but my range only lets me shoot at 50 and 100 yards. So should it be shooting this high with 55-grainers at 50 yards and how should I zero at this distance for a military zero?

Posted: 12/3/2005 10:35:15 PM EDT

[#1]

Use the IBZ

Posted: 12/4/2005 2:17:27 AM EDT

[#2]

Quoted:
Use the IBZ

+1 on the IBZ. It requires that you zero at 50m.

Posted: 12/4/2005 4:58:04 AM EDT

[#3]

Quoted:
Quoted:
Use the IBZ

+1 on the IBZ. It requires that you zero at ~~50m~~.

50 yards

6. Battlesight the rifle per the -10 with the following exceptions:

1. Sight should be at 8/3 -2 clicks, that is, all the way down, not up a click. Please note removable handle sights are marked 6/3 (rather than 8/3); also some are in ‘half-clicks’ as well. There should be 3 clicks between 3 and 4 on the knob. If there are 6 clicks then the sight needs to be set at –4 clicks (instead of –2).

2. Small aperture, nose to firing handle weld.

3. Distance is 50 yards.

4. Point of aim should be point of impact of bullet.

[ARCHIVED THREAD] - Zeroing advice

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Zeroing advice

[ARCHIVED THREAD] - Zeroing advice