AR Sponsor
[ARCHIVED THREAD] - Your next Build? (Page 1 of 2)
Posted: 3/4/2005 7:19:25 AM EDT
| So what is next on your build agenda? My next is going to be a 20incher, with a 12.0 ff rail, 1/7 inch barrel, flattop with an ACOG. |
| I am reworking a 20" A2 post-ban Bushy. I removed the barrel and FSB... its off to a machinist to get turned and threaded. I think I am going to buy a flat top upper, gas block, and FF railed handguard. I'll probably put an Aimpoint with BUIS up top... might even buy a VLTOR clubfoot standard stock. |
|
Leitner Wise MRS Leitner Wise gas piston system 14.5" 5.56mm barrel 10.5"-11.5" 5.5smm barrel 16"-18" 6.8mm barrel mabey shortey 9mm barrel, mabey not 1 optic per barrel with LaRue mounts VLTOR buttstock Surefire light and laser Last but not least the money to pay for it all. |
|
Colt 6721 lower Colt M4 upper Gemtech bi-lock permantely attached KAC RASII handguards EoTech sight VLTOR stock And my gemtech M4-96D some time in the far off future (paperwork sent in on monday lol) Someone, Anyone, want to donate to the tactical rifle build relieve fund? |
|
Its a tossup: Either another FAL with lightweight DSA lower and a turned down 14.5"bbl w/perm attached FH Or: an "original style" XM177, I'd probably also send that bbl to be turned down too  (I'm stuck on the lightweight thing lately) ETA: I'm leaning towards the car since FAL receivers and US parts are scarce right now.  , and of course I'll eventually.....BUILD BOTH!
|
|
LOOK AT (SEARCH FOR) WATSONS WEAPONS. I THINK THEY HAVE WON SEVERAL COMPITITIONS WITH THEM. JUST FUNNY LOOKING THOUGH............ 50 BMG LINK |
 I'm fascinated...sort of the way a bird is fascinated by a cobra just before it strikes. I though I'd seen just about everything before this afternoon.
|
Shok
|
My next build is just waiting for a barrel and lower.Its gonna be a Govt type M4 semi-auto clone So far I have a Bushy A2 upper complete just need a forward assist,it has a Colt A2 rear sight assembly,thanks RADDAD,Closed bottom carrier,type 2 stock and M4 handguards all 3 parts thanks to ARMCADAMS,waiting on the Bushy lower have an RRA lower parts kit and next week I order the 14.7 M4 4150 barrel assembly with permanent A2 hider from CMMG,have a Colt Bolt wit ha les baer chromed extractor,So barrel assembly and lower and Im set and a digital camera with my tax money so I can post pics of my toys
|
OH wait a minute! Nobody mentioned FALs. I am in the middle of a SA/Imbel build, with many layers of camo, and I have a Belgian and a "tactical" ( ) carbine, builds. But, I'm still waiting on a couple DCI receivers, that I ordered, and paid for, last Sept. 
|
|
A suppressed 9mm upper................. img.photobucket.com/albums/v728/rbailey/suppressed9mm.jpg |
|
I have a Colt AR15A2 HBAR that never get's shot.....so I'm turning it into a simple mid-length carbine. -16" mid-length Giffman Group Buy barrel -A set of Coyote Cav Arms mid-length handguards (M4 profile) -Tango Down Coyote Battle Grip -Magpul M93AR Coyote stock -Magpul enhanced trigger guard -and probably a Wilderness Coyote 3 point Giles Sling |
|
Upper Receiver Troy Muzzle Brake WOA Recon BBL 16" 1:9 Mid-Length Gas Piston LW MRS Rifle Length Gas Piston LW ABC Gas Piston Troy FUFS/BUIS Lower Receiver VLTOR Clubfoot Basic Kit W/ H2 or 9mm Buffer (New Compartment) Extension Tube Ambi Sling Swivel Plate LMT Lower Receiver (In Spec Magwel) LMT 2 Stage Trigger Magpul MIAD Grip (F1B2) Accessories Harris Bipod Model L HBP1A2LM Bushmaster Bipod Adapter YHM Low Profile Rail Cover Tango Down Virtical Grip |
| Flattop upper with an A1 barrel (for light weight---and yeah, I can live with 1:12) and full length A2 round handguards. Stag lower with M4 style collaspsable stock. T168 scope with a folding BUIS (not sure which one yet). A little rail section screwed on with a forward broomhandle grip, probably sitting towards the rear of the handguards to allow the forward section to be laid up on a barrier if necessary while firing. My own DMR (sort of), light weight, full size, somewhat compact rifle with optics! |
Well a 20" is next on my list but I can't decide between a M16A4gery (with ACOG) or a SAM-R forgery. I'm really leaning torwords the SAM-R but when I start pricing it out the way I would want it, well let's just say OUCH! Kreiger barrel SS match barrel (coated black), GG&G flip up site\gas block, DD or LaRue 12.0 rail, Leupold or Nightforce scope, LaRue SPR scope mount, Colt bolt and M16 carrier, etc... anyway depending on lower, stock and other options, it prices out to ~$3000. Let's just say this one will take some time to piece together! 
|
[ARCHIVED THREAD] - Your next Build? (Page 1 of 2)
AR Sponsor