AR Sponsor
[ARCHIVED THREAD] - SPR pic thread. (Page 1 of 2)
Posted: 12/21/2004 7:24:05 AM EDT
| Can someone post a link to the SPR picture thread? I did a search for it but found nothing. |
Beautiful gun mongo. I bet it shoots as good as it looks. 
|
My best to date - 100yds. I haven't been able to beat that, but I have since been working up 77gr SMK loads vs. the 69gr SMKs that I shot in the target below. That WOA SPR barrel loves the 69gr bullets. 
|
Quoted: The above are real SPRs in production, but mine is a lowly clone that I put together. It has an ADCO supplied 18" White Oak Armament SPR profile barrel with the ADCO fake SPR brake, KG coated black. The handguard is a KAC rifle length FF, as mentioned. It is really a nice, accurate setup. I have shot a 1.2" group at 200yds and did OK at 600yds with it - I actually shot 600yds with Steve from ADCO that day. I put most of the rounds in a 9" circle with some fliers, all were likely my fault. |
by far my all time favorite! |
You guys all missed the best part of that pic... Its hidden in the left side... Look real close.... 
|
Hmmmmm, beeeeeeeeeeer. But it's Hiney-can.
|
Configuration as shown Colt M16A1 RR lower Crane contractor built real SPR upper Douglass SPR barrel with fitted bolt by CLE, KG coated flat black Ops Inc. 2-port muzzle break with suppressor collar KAC low profile gas block KAC FF RAS Long w/KAC panels KAC front rail, single point receiver plate mid, and rear M4 stock QD sling swivel mounts Diamaco upper receiver Leupold Mark 4 3.5-10x40mm LR/T M3 Illuminated Reticle Butler Creek scope caps ARMS #38 QD scope mount with medium rings ARMS #22 Tactical Ring and Cap Doctor Optics red dot ARMS #32 QD Bipod adaptor Harris BRM-S Bipod w/Pod Lock handle Vltor Modstock w/Vltor buttpad and buffer spring tube "H" Buffer KAC F/A Match trigger (2-stage semi, 1-stage full auto) KNS non-rotating FCG pin set Ergo Rhino overmolded grip Ergo grip gapper KAC Match carrier (chromed LMT) with the fitted bolt from CLE w/Wolff extractor spring and crane o-ring KAC 600m rear BUIS Troy Ind. front flip BUIS PRI Gas Buster charging handle w/big latch Surefire M972C Accuwedge Magazine is Teflon w/green follower and chrome-silicon spring I left off the Surefire L72 laser off the left side, not really useful on this setup anyways. Since then, new additions are: KNS non-rotating auto sear pin Magpul trigger guard LBC Match chrome carrier Planned: Combo tailcap for M972 TD RAS panel covers Chrome silicon ejector spring Ops Inc suppressor |
All the things in red I cannot have. I should have seen that your selector was in an odd position. Mine doesn't go there. 
|
+1 |
hiney dark to be exact. double i like mine green on the outside
|
SPR-in-concept. Working on the 'can: [ link to LARGER image ] [ link to LARGER image ] |
|
You should see my feet! Hahahahaha! Are you making fun of my improvised sand bags? They work great, so far anyway. I tried to get the strongest pair I could find and filled them up pretty good with dry beans. Than tied it shut. They are lightweght and much more adjustable than the sandbags I had been using. Crumb, its not mine, its a friend of mines. My A4 is still an upper only and still without a handgaurd. But thanks, she like to hear people like her gun. It is very nice, and Im jealous of it. |
|
Here's mine built by Dave Donely of Donley's Guns 1. 1/8 Compass Lake Barrel Chrome Moly 2. Larue 12.0 FF Rail 3. PRI front flip up sight 4. Larue scope mount 5. Night Force 2.5-10 SPR scope 6. MagPul Trigger Guard 7. RRA upper and lower 8. RRA two stage trigger 9. VLTOR carbine collapsable stock 10. A1 bird cage flash suppressor 11. Sierra Precision SPR pistol grip . .  . . . Regards, Gary |
hey did you use the duracoat mirageflage templates? if so how was it? what did you use to lay the paint? airbrush? what setup did you use? thanks for any help i am considering the urban mirageflage kit and wanted to know. thanks for the help and nice rig |
| The paint is duracoat but I did not use their stencils. The stencils I made myself with contact paper, heavy art paper, and printouts of Marpat patterns. I used an airbrush to paint the gun...the cheapo 20 dollar testers kit from walmart. Came out pretty decent for my first try at camo. |
|
My SPR compass lake barrel colt upper Leopold M3 KAC front and rear sight (cortesy of AK-Mike) Ops syle FH (cortesy of ADCO) And the rest is normal SPR spec stuff etc (Makers Mark optional, but highly recomended)   My shotgroup at 100m. The rifle can shoot better than me anyday  FREE |
you didnt say to post pics of your groups!!!! OK, and before you all bust my chops and say  , I admit up front that this was a once in a lifetime group and I dont expect to see results like this many time again if ever.... But as much as I know it was luck, I know how hyped I was for it to have happened.sub 1/4 moa 3 shot group at 600 yards measuring less than 2"!  For the record, average group for this gun at 600 is 1/2 moa on a great day and 3/4 moa on a average day. |
Three shot groups are for girls.  Just kidding, nice shooting!!!!
|
[ARCHIVED THREAD] - SPR pic thread. (Page 1 of 2)
AR Sponsor