[ARCHIVED THREAD] - Chip McCormick trigger groups?

Posted: 9/27/2004 7:28:17 PM EDT

What's the consensus on these things?
link here

Posted: 9/29/2004 4:42:14 PM EDT

[#1]

Anybody got one of these?? What is the trigger pull weight??

Posted: 9/29/2004 5:07:15 PM EDT

[#2]

I have only read good stuff about them, but never seen one let alone tried one. I figure I will try one in my current SPRish build. It will be a few weeks before I order it, but Ill let everyone know when I try it out.

Posted: 10/9/2004 8:36:38 PM EDT

[#3]

I have one and the pull weight is a little over 3 pounds, it is a single stage .
It is the best trigger I have ever pulled. It was also very easy to install.
make sure you lube the pins and holes before asselmbly, they are oversized and need to be tapped in.I would highly recommend them!

Posted: 10/9/2004 8:42:15 PM EDT

[#4]

I had an extensive review thread up but i guess its buried and can only be searched by members.

short answer is they are great and trigger pull was measured at 3 lb 11 ounces. Mine is a curved single stage for large pin colt.

Posted: 10/9/2004 10:20:37 PM EDT

[#5]

Scott, I take it your review is over 3 months old because I tried to search for it and failed...

Posted: 10/9/2004 11:22:07 PM EDT

[#6]

Hmmm... it may be about that old. Do things get thrown out after that long?

TNRonin had asked me before if he could use it for something else so he may be able to find it.

Posted: 10/9/2004 11:55:46 PM EDT

[#7]

One can only search as far back as 3 months. It needs to be bookmarked if one wants to reference it past that.

I am wanting to try one of these McCormick triggers. Do the pins rotate in them or no?

Posted: 10/10/2004 12:30:54 AM EDT

[#8]

Quoted:
Hmmm... it may be about that old. Do things get thrown out after that long?

TNRonin had asked me before if he could use it for something else so he may be able to find it.

Try clicking the "My Topics" tab at the top of your page, maybe it will still be in there.

Posted: 10/10/2004 12:30:57 AM EDT

[#9]

The pins are held in by E-clips on the ends so they can rotate but I'm sure not to a damaging degree. You could use the KNS anti walk pins if you prefer.

I just tried the "my topics" and it's not there. Too bad I spent a very long time compiling it with some day to day observations. I guess we'll have to bug TNRonin or one of the other mods to get the link.

[ARCHIVED THREAD] - Chip McCormick trigger groups?

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Chip McCormick trigger groups?

[ARCHIVED THREAD] - Chip McCormick trigger groups?