AR Sponsor
Posted: 9/1/2004 5:52:29 AM EDT
| This barrel has the 11 degree 'target crown', means the last 1/2 inch on the end of the barrel is a little thicker than the rest of it. I want it threaded for a FS week after next, will this cause problems? |
|
The end of the barrel is about 3/4". The threads on AR flash hiders are 1/2". To thread the barrel, you would need to disassemble the upper, and have the barrel turned down and threaded. Probably better off just buying a new threaded chrome-lined barrel. I'm going to add a RRA 6-position to my Model "1", then either have the upper rebarreled, or just replace the upper and use the Model "1" for a .22 conversion. |
AR Sponsor