AR Sponsor
Posted: 12/19/2003 7:14:31 AM EDT
|
Gents-- Clearly a question only a newcomer would ask, but here goes: I read in my bushmaster manual that you're not supposed to 'ride' (or push) the charging handle forward. instead you should let it move forward when the bolt closes. my confusion comes in the situations where you want to lock the bolt open--must you leave the charging handle extended and unclosed until it's time to close the bolt?? seems like that handle might get in your way, snag clothing etc. thanks! S&B223 |
|
You can push it forward in that situation, it's just saying when you release it let it snap forward on the spring pressure. If you try to push it forward when the bolt assembly isn't locked back you're just going to slow the progress and cause Failures to feed. So when you lock it back using the small portion of the bolt catch, feel free to push that handle forward. |
| Another Newbie question. Should a charging handle fit all uppers? I have 2 uppers, 1 bolt carrier/bolt and 1 charging handle. The charging handle will not seat all the way in the Wilson upper (appears to get hung up on the gas tube, but is fine on the upper that it came with. Am I missing something? Thank you |
AR Sponsor