Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 10/1/2002 1:57:10 PM EDT
Does this tubbs fire lapping work good? Where can i find it? Is it worth what ever price it is?
Link Posted: 10/1/2002 2:11:29 PM EDT
MOD,

Didn't I post a reply here. Was It deleted due to content, of just lost on a reboot???

Dano
Link Posted: 10/1/2002 9:23:25 PM EDT

Originally Posted By Dano523:
MOD,

Didn't I post a reply here. Was It deleted due to content, of just lost on a reboot???

Dano



Sometimes it takes a long time for posts to upload, if your a little fast on the browser back button then the post will not go through. I have done that a few times my self. (And I have asked the MOD about it too!) If your post was deleted, I did not do it.
Link Posted: 10/2/2002 7:59:53 PM EDT
Has anyone used this lapping kit?
Link Posted: 10/2/2002 10:48:25 PM EDT
Bravo2,
I havn't used Tubbs kit per say,but have been firelapping using abrasive compounds impregnated on bullets for years now.

The process works to cure many problems caused by rough bores that werent properly lapped at the factory/maker.

However they are NOT the answer for many other problems,and wont do much in a chrome bore.

As far as damage goes,properly firelapping a bore will cause NO damage,and will only cut about .0002 from the bore dia. in the first 4-8" of the bore.
If you are having problems with copper fouling due to a rough bore near the muzzle(Where most copper fouling occurs thanks to jackets heating up from friction) firelapping will help some but not cure the problem.
Only proper lapping with either a "Soft Lap" tool or lapping with a cast lap will help.

Often,factory sporting rifle barrels will respond favorably to firelapping as they are Hammer forged,and not finished to the level good quality aftermarket barrels are.

Why is it that you are considering firelapping???

Hope this helps.
S-28
Link Posted: 10/3/2002 5:05:37 PM EDT
I got a 308pss rifle and varmint bushmaster. Just curious more than anything. I read some guys on here had done some of there guns with tubbs kit and i wondered if it really worked that well. I dont think i would try it on my expensive guns though.
Top Top